Mcp Coding Agents

mcp-orchestrate

Send every coding task to the right-priced model automatically — cheap models for the grunt work, your heavy hitter for the hard problems — and never lose work to a failed backend. mcp-orchestrate is one MCP server that maps three tiers (light / standard / heavy) onto the coding CLIs you already run — opencode, grok, codex, and claude — with capability filtering, cooldowns, and a fallback that only retries on a fast, clean failure with a byte-identical git tree, so a half-finished run is never silently redone somewhere else.

Works with any MCP client — Claude Code, Codex, Cursor, opencode, or your own.

mcp-orchestrate --init      # guided setup

Is it for you?

Use it if you run more than one coding-agent CLI and want cost/capability control without hand-picking a model every time — plus safe automatic failover. If you only use a single backend or a single model, you don't need the router; install that backend's own MCP (see below) instead.

One server, or just the individual MCPs

• mcp-orchestrate — the main product. One MCP server with tier routing,

cooldowns, and safe fallback built in. Configure once with --init, done.

• Just want the individual MCPs? If you only need a plain MCP for each coding

CLI you use — no routing — install them directly and let your assistant call whichever it needs:

``bash # Claude Code (Codex: swap claude mcp add for codex mcp add) claude mcp add opencode -- npx -y mcp-opencode claude mcp add grok -- npx -y mcp-grok # codex ships its own MCP via the codex CLI: codex mcp ... ``

These are siblings of the router over the same CLIs — no tiers, cooldowns, or fallback.

Requirements

The router spawns the backend CLIs you enable, so each must be installed and authenticated:

• opencode, grok, codex, and/or claude (the Claude Code CLI) —

whichever backends your tiers use. For claude, run claude login once to use your Claude subscription (no API key needed).

• Node.js >= 20.

Quick start

Register the stdio server with your MCP client — generic form first, then common clients:

# generic: any MCP client spawns this command
npx -y mcp-orchestrate

# Claude Code
claude mcp add orchestrate -- npx -y mcp-orchestrate
# Codex
codex mcp add orchestrate -- npx -y mcp-orchestrate

Then configure your tiers (you choose every model — nothing is baked in):

mcp-orchestrate --init      # interactive wizard; writes ~/.config/mcp-router/config.json
mcp-orchestrate --check     # validate an existing config

A minimal config:

{
  "tiers": {
    "light":    { "backend": "grok",     "model": "grok-4.5" },
    "standard": { "backend": "opencode", "model": "/" },
    "heavy":    { "backend": "claude",   "model": "opus", "permissionMode": "acceptEdits" }
  },
  "fallbacks": { "heavy": "standard", "standard": "light" }
}

Now a route(tier: "heavy", …) call runs claude. If it fails fast and cleanly and your git tree is untouched, the router retries the next configured entry (cross-provider hops require an explicit opt-in) — so a half-finished run is never silently redone on another backend.

How it works — it spawns CLIs, not MCPs

  your MCP client ──calls──▶ mcp-orchestrate ──spawns──▶ opencode / grok / codex / claude   (CLI binaries)

  mcp-opencode, mcp-grok ── siblings: separate MCP servers over the same CLIs
                            (the router never calls them)

The router is only an MCP server — it has no MCP client inside it, so it never calls mcp-opencode, mcp-grok, or the codex/claude MCPs. Whether those are installed has no effect on whether a route works.

Backends vs. models. A backend is the CLI program that runs the task (opencode / grok / codex / claude); a model is the AI it runs (e.g. grok-4.5, glm-5p2, gpt-5.6-terra, opus). One backend can front many models — which ones you can route to depends on how you've configured that CLI (your opencode install might front Anthropic, OpenAI, Fireworks, or a local provider). The router never adds models; it routes to whatever your installed CLIs already expose. claude is spawned; it runs Claude Code headless (claude -p) on your Claude subscription (no API key), provider anthropic, model opus / sonnet / haiku or a full concrete id. codex entries take a per-entry sandbox: read-only | workspace-write (default) | danger-full-access. danger-full-access removes the OS sandbox entirely (risk-flagged by --init); read-only can't write files.

Claude backend: safety & scope

• No OS sandbox — unlike codex's workspace-write sandbox, claude runs at

the same unsandboxed posture as grok/opencode today (OS-level sandboxing is deferred future work).

• Default permissionMode: "acceptEdits" lets it edit files but denies Bash in

headless mode (a headless denial no longer reads as success — the router treats it as a failure). Set "permissionMode": "bypassPermissions" per entry for full autonomy; --init flags this as a risk because it means no sandbox + full host access for that slot.

• allowedTools (claude-only) pre-approves scoped tools headless without a full

bypass, e.g. "allowedTools": ["WebFetch", "Read(./docs/**)"]. Bash(...) allow-rules are NOT a sandbox — they're escapable via command chaining (an untrusted prompt can append arbitrary commands), so a Bash rule grants effectively full shell to an untrusted prompt, the same risk as bypassPermissions; --init flags it accordingly. Non-shell rules are genuinely scoped.

• The router isolates the spawned claude process from your own MCP servers,

hooks, and CLAUDE.md (--strict-mcp-config + an empty --mcp-config + --setting-sources ''), so a routed task cannot recurse into mcp-orchestrate itself or trigger your local hooks.

• This uses claude -p via Anthropic's official CLI under your logged-in

subscription — confirm that fits your plan's terms before enabling it.

Packages

• [mcp-orchestrate](./packages/mcp-router) — the tier router (main product);

spawns the opencode/grok/codex/claude CLIs. Published: mcp-orchestrate.

• [mcp-opencode](./packages/mcp-opencode) — single-backend MCP over the opencode CLI.

Published: mcp-opencode.

• [mcp-grok](./packages/mcp-grok) — single-backend MCP over the Grok Build CLI.

Published: mcp-grok.

Per-package READMEs carry the full tool schemas, config format, environment variables, and security limitations:

• [mcp-orchestrate tiers, fallback, init, and config](./packages/mcp-router/README.md)
• [mcp-opencode setup and tools](./packages/mcp-opencode/README.md)
• [mcp-grok setup and tools](./packages/mcp-grok/README.md)

@mcp-coding-agents/core is a private, never-published package holding the shared run/parse/classify/redact/validateCwd runtime; it is bundled into each product's dist at build, so it is never a runtime npm dependency.

Develop

Clone and build from source (contributor setup — end users don't need this):

npm install
npm run build
npm test

Iterate on one package in isolation:

npm run build --workspace mcp-orchestrate
npm test --workspace mcp-orchestrate

The root package is private and has no bin, files, or publishable behavior.

License

MIT. Each publishable package contains its own copy of [LICENSE](./LICENSE).

Source & license

This open-source MCP server is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: shreeraman96
• Source: shreeraman96/mcp-coding-agents
• License: MIT

Install and usage instructions live in the source repository linked above.