Monorepo Deps

/monorepo-deps

Run the full syncpack + manypkg flow on an npm monorepo: check version mismatches, fix what's auto-fixable, bump deps via npm update with handler-set major caps in root overrides, verify, and maintain the .syncpackrc.json that governs all of this. One skill covers the whole loop. Use the underlying single-purpose skills (syncpack-usage, syncpack-cli, syncpack-config, manypkg-usage) when you need API or config detail beyond what this orchestrator carries inline.

> Structured execution spec: [protocol.yon](protocol.yon). Read it for the canonical rules and step sequence; this file is explanation. The two must stay in sync — if you edit one, update the other and refresh the @STAMP date.

Boundary

Use /monorepo-deps for the end-to-end loop on an npm workspaces monorepo: check + fix + update + lock-resync + config maintenance. Use the per-tool reference skills directly when you need a specific command surface:

• syncpack-usage — overview, decision gate, version-group behaviors
• syncpack-cli — every CLI flag, glob syntax, --dependency-types values
• syncpack-config — .syncpackrc.json schema reference (versionGroups, semverGroups, customTypes)
• manypkg-usage — manypkg CLI + rule names (EXTERNALMISMATCH, INTERNALMISMATCH, …)

This skill assumes npm (not pnpm or yarn). For pnpm/yarn monorepos the syncpack story is the same but the lock-file commands differ — adapt as needed.

Phase 1 — Detect prerequisites

Before doing anything, check whether syncpack and @manypkg/cli are installed in the target repo. The skill's behavior splits on this:

| State | Action | | --- | --- | | Both installed | Proceed silently to Phase 2 — no asking, no install | | One or both missing | Stop. Explain to the user what each tool does + why useful (see prose below), then ASK with a single decision: install + continue, or abort. On reject → stop. On accept → install as root devDeps, then continue. |

Detection: read the root package.json and check devDependencies for syncpack and @manypkg/cli. (Don't shell out for this — the file is cheap to read.)

If asking the user to install, use this language:

> Your repo doesn't have syncpack/manypkg installed yet. They're a near-canonical pair for npm-workspace monorepos: > > - syncpack — finds and fixes dependency version mismatches across all your workspaces, enforces consistent semver ranges (e.g. ^ for dev/prod, exact for overrides), and lets you ban or pin deps via a single .syncpackrc.json. Without it, drift between consumer package.json files goes unnoticed until a build breaks. > - manypkg — validates that workspace package.jsons are internally consistent (versions of @my/pkg agree across consumers) and the most-common-range rule catches deps where one app diverged from the rest. Smaller surface than syncpack but catches a different class of bug. > > Together they're the standard belt-and-suspenders for keeping a workspace healthy. Install both as root devDeps and continue?

Single decision: yes (install + continue) / no (stop).

Phase 2 — Pick the operation

If the user invoked with a subcommand (/monorepo-deps update, /monorepo-deps check, /monorepo-deps fix, /monorepo-deps init-config, /monorepo-deps maintain-config), route directly. Otherwise ask which:

| Op | What it does | | --- | --- | | check | syncpack lint + manypkg check + npm outdated --workspaces summary. Read-only. | | fix | syncpack fix + manypkg fix, then npm install to resync lock. No npm update. | | update | The full sweep: fix first, then npm update --workspaces --include-workspace-root, handle EOVERRIDE/peer conflicts, re-verify. | | init-config | Create a starter .syncpackrc.json from a template (see Phase 5). For repos that don't have one. | | maintain-config | Add/edit groups in an existing .syncpackrc.json — pin a new shared dep, add a semver exception, add a banned dep, etc. |

Phase 3 — Execute

check

npx syncpack lint
npx manypkg check
npm outdated --workspaces --include-workspace-root --json > /tmp/outdated.json

Summarize /tmp/outdated.json: group by major / minor / patch / missing, show consumer count per dep. Don't change anything. Report findings.

fix

npx syncpack fix
npx manypkg fix
npm install

syncpack fix rewrites consumer package.json ranges to conform to the version groups + semver groups in .syncpackrc.json. manypkg fix handles the rules it knows about (typically a no-op once syncpack has run). npm install resyncs the lock to the rewritten package.jsons. Re-run syncpack lint && manypkg check at the end to confirm clean.

update

The full sweep. Run in this order:

1. fix first (above) so we're updating from a known-clean baseline.
2. npm outdated --workspaces to see what would bump. Group by major / minor / patch.
3. Decide which majors to allow. For each major: is it a deliberate breaking-change opt-in (e.g., the consumer package.json already says ^NewMajor) or would npm update silently cross because the override is *? The first kind is fine to let flow; the second kind needs a cap in root overrides.
4. Cap unwanted majors in root overrides. Pattern: "typescript": "^5", "eslint": "^9", "lucide-react": "^0". Cap at the current major. See "EOVERRIDE conflicts" below if npm rejects the override.
5. npm update --workspaces --include-workspace-root — bumps everything to latest within ranges. The override caps block unwanted majors; consumer ^NewMajor ranges flow through.
6. Handle conflicts if they fire (see two subsections below).
7. Re-verify: npx syncpack lint && npx manypkg check && npm ci --dry-run --workspaces --include-workspace-root. All three must pass before stopping.

EOVERRIDE conflicts

npm error code EOVERRIDE: Override for @ conflicts with direct dependency fires when the dep is both a direct dep at the root AND has an override that doesn't match. Resolution options:

• Match the ranges. Set root devDep range equal to the override range (e.g. both ^5). Often the cleanest fix — but watch manypkg in the next subsection.
• Remove the root direct dep. If nothing at the root actually needs the dep directly (it's only used transitively or by workspaces), drop it from root devDependencies. The override still applies via dedupe. This was the right call for typescript in the YounndAI repo — root scripts use turbo run check-types which resolves typescript via workspaces, not the root.
• Scope the override to transitive only: "typescript": { ".": "^5" } syntax means "only apply to transitive uses, leave direct deps alone." Useful when you can't drop the root dep but don't want it capped.

Peer-dep conflicts

npm error code ERESOLVE: Could not resolve dependency: peer X@ from Y fires when a transitive peer wants an exact version that doesn't match what's installed. Fix:

• Pin the dep at the exact version the peer wants — both at the point of declaration (a root devDep with no ^) AND, if syncpack would otherwise force a ^ range, add a semver group exception:

``json { "label": "X requires exact match for Y peer dep", "packages": ["**"], "dependencies": ["X"], "dependencyTypes": ["prod", "dev"], "range": "" } ` Add this to .syncpackrc.json semverGroups **before** the generic "range": "^"` group (semver groups are first-match-wins).

manypkg EXTERNAL_MISMATCH after capping a major

If you cap a dep in overrides AND pin it as a root devDep at the matching range, manypkg complains that the root range differs from the most-common range across workspaces (*). Resolutions:

• Drop the root devDep entirely (preferred when possible) — see EOVERRIDE section above.
• Globally ignore EXTERNAL_MISMATCH via manypkg config in root package.json: "manypkg": { "ignoredRules": ["EXTERNAL_MISMATCH"] }. Reasonable when syncpack is already enforcing dep consistency more flexibly — but loses manypkg's most-common-range guard for the whole repo, not just that one dep.

init-config

Create .syncpackrc.json at repo root with the override-driven monorepo template. The template encodes a battle-tested pattern: workspace deps are * (no version pinning), shared deps are * driven by root overrides, dev/prod deps use ^, overrides use exact. Adjust the dependency lists for the target repo.

{
  "versionGroups": [
    {
      "label": "Local workspaces use *",
      "packages": ["**"],
      "dependencies": ["$LOCAL"],
      "dependencyTypes": ["prod", "dev", "peer"],
      "pinVersion": "*"
    },
    {
      "label": "Override-managed deps — versions controlled by root overrides, use * everywhere",
      "dependencies": [
        "typescript", "zod", "react", "react-dom",
        "@types/node", "@types/react", "@types/react-dom",
        "tailwindcss", "eslint",
        "next", "@next/**"
      ],
      "isIgnored": true
    },
    {
      "label": "Ignore resolutions and local version field",
      "dependencyTypes": ["local", "resolutions", "pnpmOverrides"],
      "isIgnored": true
    }
  ],
  "semverGroups": [
    {
      "label": "Use ^ for deps",
      "packages": ["**"],
      "dependencyTypes": ["prod", "dev"],
      "range": "^"
    },
    {
      "label": "Use exact for overrides",
      "packages": ["**"],
      "dependencyTypes": ["overrides"],
      "range": ""
    }
  ]
}

After creating, also update root package.json overrides block to declare which versions actually apply (start with * for everything you listed, pin majors as needed).

maintain-config

Common edits:

• Pin a new shared dep — add it to the "Override-managed deps" dependencies array, then add an entry in root overrides. Existing consumer ranges should already be * (or change them with syncpack fix).
• Add a peer-pin exception — append a new semver group with "range": "" before the generic "^" group (first-match-wins).
• Ban a dep — add a version group: { "dependencies": ["pkg-name"], "isBanned": true, "label": "Use Y instead" }.
• Cap a major in overrides — change override value from * to ^N where N is the current major.
• Allow patch+minor on an exact-pinned override — change X.Y.Z to ^X.Y.Z.

Always re-run npx syncpack lint && npx manypkg check after editing.

Phase 4 — Verify

Before declaring done:

npx syncpack lint              # → "No issues found"
npx manypkg check              # → "workspaces valid!"
npm ci --dry-run --workspaces --include-workspace-root   # → no "Missing X from lock file" errors

If any of these fail, surface the error to the user — don't silently re-loop.

Phase 5 — Maintain (ongoing)

Once a repo has syncpack + manypkg + a .syncpackrc.json, the maintenance cadence is:

• On every PR that touches deps — CI should run npx syncpack lint && npx manypkg check as a required gate. Without this, drift creeps back in.
• Whenever a shared dep needs a new version — bump the entry in root overrides (not in 50 consumer package.jsons).
• Whenever a new shared dep appears across multiple consumers — add it to the "Override-managed deps" group in .syncpackrc.json, then root overrides.
• Whenever a peer dep needs an exact version — add a semver group exception in .syncpackrc.json semverGroups before the generic ^ group.
• Quarterly or before a release — /monorepo-deps update to sweep patches + minors, decide majors deliberately.

Rules

• MUST detect both syncpack and @manypkg/cli before any operation; if missing, ASK the user once with the explanation paragraph above and abort on reject.
• MUST run syncpack lint && manypkg check as a final verification step before declaring done — both must pass.
• MUST resync the lock with npm install (or npm update for the update op) after any syncpack fix that rewrites ranges.
• MUST cap unwanted majors in root overrides BEFORE running npm update, not after.
• MUST handle EOVERRIDE conflicts by adjusting ranges or dropping the root direct dep — never use --force or --legacy-peer-deps to mask them.
• MUST handle peer-dep conflicts by adding a semver group exception in .syncpackrc.json, not by globally weakening the semver rule.
• MUST NOT auto-fire — only run when the user invokes /monorepo-deps or asks for one of the trigger phrases.
• MUST NOT add NPM scripts or git hooks unless the user explicitly asks (this skill does the work; CI integration is a separate decision).
• MUST NOT touch pnpm-lock.yaml or yarn.lock files — this skill is npm-only.
• MUST NOT commit or push — that's /github-sync's job. End with a status summary and let the user decide.

> Human output. This skill's handler-facing output obeys the human-output > contract (human-output/SKILL.md).

> Next skills. On completion, run the Next Skills protocol (next-skills/SKILL.md): surface the next-skills recommendations from front-matter for the caller to pick. Offer only — never auto-invoke.

> Self-improvement. On completion, run the Self-Improvement Protocol (self-improve/SKILL.md): if this run surfaced a concrete, blocking-or-recurring weakness in this skill, propose a specific fix for the handler to approve. Conservative — silent otherwise. Never auto-apply.

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: allemaar
• Source: allemaar/open-skills
• License: Apache-2.0
• Homepage: https://allemaar.com

Install and usage instructions live in the source repository linked above.