Shredding Solicitations

Shredding Solicitations

Take a federal solicitation apart, requirement by requirement, and build the compliance matrix — the table that maps every requirement to the proposal location that answers it. The compliance matrix is the spine of a compliant proposal. Every later proposal skill works against it. A requirement that is not in the matrix is a requirement the proposal will miss, and a missed material requirement is a deficiency.

When to use this skill

Use this skill as the first proposal-development step after the RFP releases (or on a draft RFP, to get a head start). It precedes outlining, drafting, and every volume-specific skill.

It does not build the proposal outline — that is outlining-proposals, which consumes this matrix. This skill produces the requirements inventory; the outline turns it into a document structure.

Inputs

Required: the solicitation itself — at minimum Sections L, M, and C (or the SOW/PWS/SOO and the instructions/evaluation equivalents). Place the document in the pursuit workspace source/ directory. Include all amendments and the Q&A.

Preferred upstream artifacts:

• 00-opportunity-profile.md: orienting context.
• 05-win-strategy.md: lets the matrix flag where themes will be threaded.

Without the win strategy, the matrix is still complete; it simply omits the theme-placement column.

Read ../../shared/federal-solicitation-primer.md, ../../shared/glossary.md, and ../../shared/pursuit-workspace.md if not already read this session. The primer's "proposal triad" guidance governs this skill.

Intake

Ask these as a numbered list. Skip what the solicitation itself answers.

1. The document set. Is the full solicitation available — Sections L and M,

the SOW/PWS/SOO, Section H, attachments, all amendments, and the Q&A? What is missing?

1. Document structure. Does the solicitation use the standard Uniform

Contract Format, or a compressed task-order/commercial format? Where are the instructions, the evaluation factors, and the requirement located?

1. Volumes. Does Section L define the proposal volumes and their separation

(e.g., Technical, Management, Past Performance, Cost)? What are they?

1. Amendments. Have all amendments been incorporated? Did any amendment

change Section L, Section M, the requirement, or the due date?

1. Win strategy. Is there a 05-win-strategy.md to cross-reference for theme

placement?

If the document set is incomplete, shred what is available and list precisely what is missing — an incomplete shred is dangerous if it is mistaken for a complete one.

Workflow

Solicitation Shred:
- [ ] Step 1: Read the primer's triad guidance; complete intake
- [ ] Step 2: Identify the governing sections and the volume structure
- [ ] Step 3: Extract Section L instruction requirements
- [ ] Step 4: Extract Section M evaluation requirements
- [ ] Step 5: Extract Section C / SOW / PWS / SOO requirements
- [ ] Step 6: Cross-walk L  M  C; flag conflicts and gaps
- [ ] Step 7: Extract format, page, and submission rules
- [ ] Step 8: Write the compliance matrix (10-compliance-matrix.md) and validate

Step 1: Triad and intake. Re-read the primer's "read M, then L, then C" guidance. Run intake.

Step 2: Governing sections and volumes. Locate the instructions, the evaluation factors, and the requirement, by function (the primer explains how when the format is non-standard). Record the volume structure from Section L — it is the top level of the matrix.

Step 3: Section L requirements. Extract every instruction: what each volume must contain, in what order, what each section must address. Use the requirement extraction method in references/shredding-method.md — capture every directive ("shall", "must", "will", and instructional imperatives), each as one atomic, separately verifiable requirement.

Step 4: Section M requirements. Extract every evaluation factor, subfactor, and element, and the basis of evaluation. Each becomes a matrix row: the proposal must not just address it but win on it.

Step 5: Section C / SOW / PWS / SOO requirements. Extract every performance requirement, deliverable, and standard. For a PWS, capture the outcomes and their measurement; for a SOO, capture the objectives the offeror's proposed SOW must satisfy.

Step 6: Cross-walk. This is the step that distinguishes a real compliance matrix from a checklist. Link each requirement across the triad: which Section M factor evaluates this Section C requirement; which Section L instruction tells the offeror where to write it. Flag two failure types: an L/M conflict or ambiguity (an instruction and an evaluation factor that do not align) and a gap (a Section M factor with no Section L instruction, or a Section C requirement no factor evaluates). Conflicts and ambiguities are candidate questions for the contracting officer.

Step 7: Format and submission rules. Extract every page limit, font and margin rule, file format and naming rule, volume separation rule, the due date and time, the submission method, and required forms, certifications, and representations. These go in a separate register (checking-submission-compliance relies on it). A proposal can be rejected on these alone.

Step 8: Write and validate. Write 10-compliance-matrix.md using templates/compliance-matrix.md and the ID scheme in references/compliance-matrix-format.md. Run the template's validation checklist: every requirement is atomic and traceable to its source location, the cross-walk is complete, conflicts and gaps are flagged, and the format register is complete.

Output

One artifact: 10-compliance-matrix.md in the pursuit workspace, including the format and submission register as a labeled section.

Present the user with: the volume structure, the requirement count by section, the flagged L/M conflicts and gaps (with suggested CO questions), and the binding format constraints (page limits especially).

References

• references/shredding-method.md: requirement extraction, requirement language, atomic requirements, the L/M/C cross-walk, handling PWS and SOO.
• references/compliance-matrix-format.md: the matrix structure, the requirement ID scheme, the columns, and the compliance status values.
• templates/compliance-matrix.md: the compliance matrix artifact template and its validation checklist.

Guardrails

• Atomic requirements. One requirement per row. A compound instruction split

into three checkable parts is three rows. Compounds hide missed obligations.

• Trace everything. Every row cites its exact source location (section and

paragraph). A requirement with no traceable source is suspect.

• Do not invent or soften. Extract what the solicitation says. Do not add

requirements that are not there, and do not downgrade a "shall" to a "should".

• Flag, do not resolve, ambiguity. Where L and M conflict or a requirement

is genuinely unclear, flag it as a CO question. Guessing the government's intent is how proposals become non-compliant.

• Section L wins. Where this package's conventions differ from the

solicitation's instructions, the solicitation governs.

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: danielkinneyspears
• Source: danielkinneyspears/federal-proposal-skills
• License: Apache-2.0

Install and usage instructions live in the source repository linked above.