Mormot2 Auth Security

mormot2-auth-security

mORMot 2 cryptographic primitives and authentication building blocks: JWTs (mormot.crypt.jwt), ECC P-256 keys, certificates and ECIES encryption (mormot.crypt.ecc), AES-GCM authenticated encryption (mormot.crypt.core), HMAC and PBKDF2 key derivation (mormot.crypt.secure.TSynSigner), modular-crypt password hashes including BCrypt and SCrypt (mormot.crypt.other), and the OpenSSL backend that swaps these in when available (mormot.crypt.openssl). This skill covers the algorithms and the key material. Sibling skills cover what sits on top: mormot2-rest-soa owns the TRestServer session and authentication scheme that consumes JWTs and password hashes; mormot2-net owns TLS contexts and Let's Encrypt cert lifecycle; mormot2-core owns the RawUtf8 and RTTI conventions every example below depends on.

When to use

• Issuing or verifying a JWT signed with HMAC (TJwtHS256, TJwtHS512), ECDSA P-256 (TJwtEs256), or any algorithm reachable through TJwtCrypt and ICryptPublicKey / ICryptPrivateKey.
• Generating an ECC P-256 key pair and certificate via TEccCertificateSecret, persisting it with SaveToSecureFile, loading it back with LoadFromSecureFile, and managing trust with TEccCertificateChain.
• Encrypting a payload at rest with TEccCertificate.Encrypt (the framework's ECIES envelope: ephemeral ECDH P-256 + AES-256 + HMAC tag) and decrypting with TEccCertificateSecret.Decrypt.
• Setting up an authenticated channel with TEcdheProtocolClient / TEcdheProtocolServer, which run an ECDHE handshake and frame the rest of the conversation with AES + HMAC.
• Symmetric authenticated encryption with TAesGcm (or the TAesFast[mGcm] lookup, which picks the fastest available implementation): set the IV, optionally feed AAD, encrypt, then read the auth tag with AesGcmFinal.
• Hashing, HMAC and PBKDF2 with TSynSigner over TSignAlgo (SHA-1, SHA-2 family, SHA-3 / SHAKE), and stand-alone helpers like Sha256Hex and Pbkdf2HmacSha256.
• Storing a password as a Modular Crypt Format string with TSynSigner.Pbkdf2ModularCrypt (PBKDF2 variants) or, after pulling in mormot.crypt.other, mcfBCryptSha256 and mcfSCrypt. Verify with ModularCryptVerify.
• Deriving a session token, signing a manifest, or computing a release signature with TSynSigner.Full / TSynSigner.Pbkdf2.
• Switching the same APIs to OpenSSL primitives by registering mormot.crypt.openssl and gating with OpenSslIsAvailable.

When NOT to use

• Wiring up a TRestServer authentication scheme, creating sessions, or returning tokens from OnAuthenticate. Use mormot2-rest-soa. This skill produces the JWT; that one decides who sees it.
• Issuing, renewing, or serving a TLS certificate, terminating HTTPS, or wiring OnNetTlsAcceptServerName. Use mormot2-net.
• RawUtf8, TDocVariant, RTTI, and JSON conventions used in the examples below. Use mormot2-core.
• Long-term certificate stores backed by X.509 / OpenSSL TCryptStoreOpenSsl for chain validation and CRL handling: those live here, but if your task is "make the HTTPS handshake trust this CA", route to mormot2-net.

Core idioms

1. Issue and verify a JWT signed with ECC P-256

TJwtEs256 (in mormot.crypt.jwt) signs with ECDSA over secp256r1. The same instance can issue and verify provided its TEccCertificate carries the private key (i.e. is actually a TEccCertificateSecret). Verify-only services pass a public-key-only TEccCertificate.

uses
  mormot.crypt.ecc,
  mormot.crypt.jwt;

var
  Cert: TEccCertificateSecret;
  Jwt: TJwtEs256;
  Token: RawUtf8;
  Content: TJwtContent;
begin
  Cert := TEccCertificateSecret.CreateNew(nil, 'auth@example.com');
  Jwt := TJwtEs256.Create(
    Cert,
    [jrcIssuer, jrcSubject, jrcExpirationTime, jrcJwtID],
    ['api.example.com'],          // accepted audiences
    60);                           // expiration minutes
  try
    Token := Jwt.Compute([], 'auth.example.com', 'user-42', 'api.example.com');
    Jwt.Verify(Token, Content);
    Assert(Content.result = jwtValid);
  finally
    Jwt.Free;
    Cert.Free;
  end;
end;

For HMAC-secured tokens, swap in TJwtHS256 and pass a high-entropy secret (>= 32 bytes). For an algorithm-agnostic flow that works with any registered asymmetric algorithm (ES256, RS256, EdDSA when OpenSSL is loaded), use TJwtCrypt with a TCryptAsymAlgo.

2. Generate, store and load an ECC P-256 keypair

TEccCertificateSecret.CreateNew produces a fresh secp256r1 keypair plus a self-signed certificate. Persist it with SaveToSecureFile, which AES-encrypts the private key under a PBKDF2-derived KEK, and load it with the matching LoadFromSecureFile.

uses
  mormot.crypt.ecc;

var
  Sec: TEccCertificateSecret;
begin
  Sec := TEccCertificateSecret.CreateNew(nil, 'svc@example.com');
  try
    Sec.SaveToSecureFile('passphrase', '/var/lib/myapp/keys/');
    // file: /var/lib/myapp/keys/.private  (PBKDF2 + AES-CFB envelope)
  finally
    Sec.Free;
  end;

  Sec := TEccCertificateSecret.CreateFromSecureFile(
    '/var/lib/myapp/keys/', '', 'passphrase');
  try
    // Sec.HasSecret = True; Sec.Sign(...) and Sec.Decrypt(...) now work.
  finally
    Sec.Free;
  end;
end;

For verify-only deployments, ship TEccCertificate (no Secret) loaded via FromBase64 or LoadFromStream. Group multiple trusted certs in a TEccCertificateChain and call IsValid to traverse the trust path.

3. AES-GCM with explicit nonce control

TAesGcm lives in mormot.crypt.core. The IV must be 12 bytes (GCM standard); only the first 12 bytes of whatever you pass are used. Never reuse an (IV, key) pair: GCM catastrophically loses confidentiality and authenticity when nonces repeat.

uses
  mormot.crypt.core;

var
  Aes: TAesGcm;
  Key: THash256;
  IV: THash128;
  Plain, Cipher: RawByteString;
  Tag: TAesBlock;
begin
  RandomBytes(@Key, SizeOf(Key));
  RandomBytes(@IV,  SizeOf(IV));   // 12 of these 16 bytes will be used
  Aes := TAesGcm.Create(Key, 256);
  try
    Aes.IV := IV;
    Aes.AesGcmAad(@Header[1], length(Header));  // optional AAD
    Cipher := Aes.EncryptPkcs7(Plain, {ivAtBeginning=}false);
    if not Aes.AesGcmFinal(Tag, 16) then
      raise ESynCrypto.Create('GCM finalization failed');
  finally
    Aes.Free;
  end;
end;

For a faster runtime-selected backend (mORMot's hand-tuned x86_64 asm versus OpenSSL EVP), use TAesFast[mGcm] instead of TAesGcm directly.

4. PBKDF2 password hash in Modular Crypt Format

TSynSigner.Pbkdf2ModularCrypt produces a self-describing string ($pbkdf2-sha256$$$$). The number of rounds comes from the MCF_ROUNDS global, which the framework keeps aligned with OWASP Password Storage guidance (2025: PBKDF2-SHA-256 = 600,000 rounds). ModularCryptVerify parses any supported format and verifies in constant time.

uses
  mormot.crypt.secure;

var
  Sig: TSynSigner;
  Stored: RawUtf8;
begin
  Stored := Sig.Pbkdf2ModularCrypt(mcfPbkdf2Sha256, 'user-password');
  // store Stored in DB; later:
  if not ModularCryptVerify('user-password', Stored) then
    raise ESecurity.Create('bad password');
end;

For stronger memory-hard hashes, register mormot.crypt.other and pick mcfBCryptSha256 (recommended for general use) or mcfSCrypt. The framework treats Argon2 as less proven for production timing and does not ship a default; if you must use it, do it through OpenSSL directly. A bare Sha256Hex(Password) is not a password hash and must not be used for storage.

5. HMAC, PBKDF2 and code signing with TSynSigner

TSynSigner is the unified HMAC / SHA / SHA-3 frontend. Same struct, switch the algorithm enum (TSignAlgo). Use it for cookie tampering protection, file manifest signing, and as the KDF for application-derived keys.

uses
  mormot.crypt.secure;

var
  Sig: TSynSigner;
  Mac: RawUtf8;
  Key: THash512Rec;
begin
  // Authenticate a manifest with HMAC-SHA-256.
  Mac := Sig.Full(saSha256, 'shared-secret', ManifestBytes);

  // Derive a 32-byte session key from a passphrase + per-session salt.
  Sig.Pbkdf2(saSha256, 'passphrase', SessionSalt, 100000, Key);
end;

TSynLog calls TSynSigner internally for its rotated archive signing, which is also how the framework signs its own log bundles when EchoCustom chains a signer.

Common pitfalls

• Reusing an AES-GCM nonce. (IV, key) pairs are the entire safety story. Repeat once and an attacker recovers the authentication subkey, forges arbitrary ciphertexts, and learns the XOR of the two plaintexts. Use a 96-bit random nonce per message only if you can guarantee the message rate stays well below the birthday bound (~2^32), or use a 96-bit counter you persist across restarts. Never derive nonces from the plaintext.
• Treating SHA-256 of a password as a password hash. Sha256Hex(Password) is fast on purpose. An attacker with one GPU runs through every ten-character ASCII password in hours. Always go through mcfPbkdf2Sha256 (PBKDF2 with MCF_ROUNDS[mcfPbkdf2Sha256]) at minimum, and prefer mcfBCryptSha256 or mcfSCrypt from mormot.crypt.other. The same applies to MD5, SHA-1, SHA-512, and any unsalted construction.
• Mixing PEM, raw and "secure binary" key formats. mORMot 2 ships three serialisations: SaveToBinary (raw TEccCertificateContent, public-key-only by default), SaveToSecureBinary / SaveToSecureFile (PBKDF2 + AES envelope, private key included), and PEM via EccToDer + DerToPem. Pick one per file format and document it. Loading a SaveToBinary blob through LoadFromSecureBinary returns false silently and leaves you with an unusable certificate.
• Wide JWT clock skew tolerance. TJwtAbstract.VerifyTimeToleranceSeconds defaults to 30 seconds, which forgives clock drift between the issuer and the verifier. Setting it to "a few minutes" because NTP is flaky widens the replay window for a stolen token by exactly that much. Fix the clock (NTP / chrony), do not raise the tolerance, and never set it above 60 seconds in production.
• Picking weak HMAC secrets for TJwtHS256. A 16-byte random secret is the floor; many "borrowed" secrets are 8 ASCII characters. The HMAC key must be at least as long as the digest output (32 bytes for HS256, 64 for HS512) and come from RandomBytes, not a config-file paste. If the secret lives in a .env you also commit, treat it as already leaked.
• Logging tokens, passwords or private keys at INFO. TSynLog will happily echo a RawUtf8 into a rotating archive that ends up in your aggregator. Mask JWT bearer tokens before logging, never log a TEccCertificateSecret (SaveToBinary({publickeyonly=}false) is the dangerous path), and route any code that builds a password hash through the sllSensitive family with a redactor.
• Calling TJwtEs256.Verify with a private-key certificate on every node. Verifiers only need the public key. Shipping TEccCertificateSecret (i.e. the .private file) to every API node multiplies your blast radius by the number of nodes. Export with SaveToBinary({publickeyonly=}true) and ship that to verifiers; keep SaveToSecureFile only on the issuer.
• Forgetting to register mormot.crypt.openssl when you expected RS256 or EdDSA. TJwtCrypt.Supports(caaRS256) returns false until mormot.crypt.openssl is in the unit list and OpenSslIsAvailable returns true. The framework's built-in providers cover ES256 and the HMAC family; everything else needs OpenSSL. Add the unit, gate on OpenSslIsAvailable, and fall back to ES256 if OpenSSL is missing.

See also

• $MORMOT2_DOC_PATH/mORMot2-SAD-Chapter-21.md - Security
• $MORMOT2_DOC_PATH/mORMot2-SAD-Chapter-23.md - ECC Encryption
• references/sessions-jwt.md
• references/ecc-aes-gcm.md
• references/signing.md
• mormot2-rest-soa for the TRestServer authentication scheme that consumes these primitives
• mormot2-net for TLS, SNI, and ACME certificate lifecycle
• mormot2-core for RawUtf8, TDocVariant, and RTTI conventions used throughout the snippets above

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: flydev-fr
• Source: flydev-fr/mormot2-superpowers
• License: MIT

Install and usage instructions live in the source repository linked above.