Deep Research

Deep Research

Research any topic with the rigor of an expert analyst. The difference between good and great research isn't volume — it's knowing when to go wide, when to go deep, and when your sources are lying to you.

This skill produces research that surfaces non-obvious insights, flags contradictions, and cross-references claims across independent sources — rather than summarizing whatever comes up first in search results.

Write like an expert journalist, not an AI assistant. Lead with the most important findings. No filler phrases ("It's worth noting", "In today's landscape", "It's important to understand"). Every factual claim gets a [N] citation in the same sentence — not at the end of a paragraph, not as a footnote, but right next to the claim it supports.

Modes

| Mode | Invoke | Min sources | Time | Token cost | When to use | |------|--------|-------------|------|------------|-------------| | Standard | /deep-research | 10+ | 3-10 min | ~5x chat | Most research questions — go deep by default | | Deep | /deep-research deep | 20+ | 15-45 min | ~15x chat | High-stakes decisions, when you need adversarial validation and multi-agent coverage |

The user can also specify effort as a number: /deep-research 15 means "use at least 15 sources."

Important: The source minimums are floors, not ceilings. If the topic is rich and you're finding valuable sources, keep going. A standard-mode research that finds 30 great sources is better than one that stops at 10 because "the minimum is met." Search as broadly and deeply as the topic warrants — the skill adds structural discipline, not artificial limits.

---

Standard Mode (5 phases)

A single primary researcher plus a dedicated source-vetting subagent (separation of duties — Phase 3.5), with structured search, credibility filtering, and synthesis. Standard mode should be thorough — don't cut corners on search breadth just because it's not "deep mode." The difference from deep mode is scale (one researcher + a vetter vs a multi-agent team), not ambition.

Phase 1: Scope

Understand what the user actually needs to know and why. This shapes everything downstream.

Ask (if not obvious from context):

• What's the core question? Not the topic — the decision or understanding they need.
• What do they already know? (Avoid re-discovering what's obvious to them.)
• Any known sources, constraints, or angles?

If the user gave a clear prompt, skip the interview and extract answers from context. State your interpretation and proceed.

Output: A research brief — 3-5 bullet points capturing the question, angle, known constraints, and success criteria.

Phase 2: Decompose & Search

Break the question into 3-5 sub-questions that, when answered together, fully address the original question.

Search strategy — breadth first, then narrow:

1. Start with short, broad queries via Exa. Broad queries surface the landscape; specific queries miss the unexpected.
2. Evaluate what's available — which sub-topics have rich sources? Which are sparse?
3. Follow up with narrower, targeted queries based on what you found.

Use advanced search operators when helpful: "exact phrase", site:domain.com, date filters.

Tools:

• mcp__exa__web_search_exa — primary search (AI-powered, better for conceptual queries)
• WebSearch — fallback for factual/current queries
• mcp__exa__crawling_exa — extract content from specific URLs

Per sub-question: Run 2-3 search queries with different phrasings. Variety in query formulation is how you escape the filter bubble.

Don't stop early. Run multiple search iterations: search → read → reflect → search again with refined queries. The first pass gives you the landscape; the second pass fills gaps; the third surfaces the non-obvious. If you're finding valuable sources, keep searching — depth matters more than speed.

Phase 3: Read & Extract

For each promising result, read the full page (not snippets). Snippets miss context, caveats, and methodology.

• Use WebFetch or mcp__exa__crawling_exa to read full content
• Read 3-5 pages per search iteration minimum
• Extract: key claims, data points, exact quotes, methodology, author credentials
• Note the source type: primary research, industry report, blog post, documentation, forum discussion

Source quality — judge on two axes, not one. Before scoring any source, read [references/source-credibility.md](references/source-credibility.md) (standard mode reads it too — not just deep mode). The one-line trap it prevents: production polish is not authority — a glossy corporate blog reads as authoritative and slides into the report as fact. Judge authority (Primary/Secondary/Tertiary) and independence (Independent/Interested/Unknown) separately.

The legacy A/B/C tiers below are the reconciled shorthand (full rules + patches in the rubric):

| Tier | What lands here | Use | |------|----------|-----| | A — Authoritative | Primary-Independent: academic papers, official docs, gov data, standards bodies, regulatory filings, and a disinterested practitioner's first-party data/benchmarks (raw numbers are Primary; a vendor's own data goes in B, not here; cherry-picking still fails claim-binding) | Primary evidence. Cite freely. | | B — Credible | Secondary-Independent journalism w/ method, analyst reports with disclosed methodology, conference talks — or a vendor's own data restated as a claim (Primary-Interested → cite but flag ⚠vendor) | Supporting. Needs an Independent corroboration chain for any load-bearing claim. | | C — Supplementary | Tertiary or Interested-Secondary: company/corporate blogs about their own category, opinion pieces, marketing content, aggregators, forum/review discussions (⚠manipulable) | Use sparingly. Never the sole basis for a claim; write as "X claims…", not fact. | | Exclude | No author/date, unverifiable, clearly outdated, SEO content farms | Do not cite. |

When a blog post references a study — find the study. Chase primary sources (best-effort: if a paywall/opaque synthesis blocks it, flag the claim secondary-only rather than assuming the chase succeeded). Secondary sources introduce telephone-game distortion.

Source diversity rule: No single domain (e.g., crunchbase.com, techcrunch.com) should account for more than 25% of your sources. If you notice concentration, deliberately search for alternative source ecosystems — academic databases, industry associations, government data, regional publications, practitioner blogs. Concentration = blind spot.

Geographic awareness: Default search results skew US/English. If the topic has global relevance, explicitly search for perspectives from other markets (EU, Asia, emerging markets). Add geographic qualifiers to at least one search query per sub-question. A US-only analysis should be flagged as such in the report, not presented as universal.

Phase 3.5: Independent source vetting

You just collected and skimmed these sources — which means your priors are already anchored to them. Before synthesizing, get a second opinion from an agent that did not do the collecting (this is real separation of duties, not you re-reading your own notes and re-approving them).

Launch one Agent (general-purpose) as a Source Vetting pass: hand it the extracted source content (not just a URL list — grading from domain names alone is guessing, not vetting) + the key claims you intend to use, and the rubric references/source-credibility.md. Ask it to return, per source, the authority (P/S/T) + independence (Ind/Int/Unknown) + sub-flags, and — for each load-bearing claim — how many independent evidence chains actually back it (collapsing echoes). It should default to skepticism and specifically hunt for polished-but-interested sources you may have over-trusted.

Fail-open: if the vetter is low-confidence or errors, treat unvetted sources as Unknown=Interested and note "ledger degraded" — never silently trust the raw collection. Fold the ledger into Phase 4 (rank Independent-Primary first; demote interested-only claims to "X claims…").

(Cheap insurance — one extra subagent. These are the Exa-primary research skills; the spend is the point. Skip only if every source is already Independent-Primary, which is rare — otherwise always run it.)

Phase 4: Synthesize

Combine findings into a coherent answer. This is where mediocre research fails — by smoothing over contradictions to create a clean narrative.

Instead:

• Flag contradictions explicitly. "Source A claims X [1], but Source B found Y [2]. The difference may be because..."
• Distinguish confidence levels. Some claims have strong multi-source support; others are single-source speculation.
• Surface minority viewpoints. The consensus answer isn't always right. If credible sources disagree, say so.
• Cross-reference: Every significant claim should appear in 2+ independent sources. Single-source claims get flagged.
• Apply the credibility usage rules (references/source-credibility.md): a load-bearing claim resting only on Interested/Unknown sources is written as "X claims…" (never bare fact) and flagged ⚠uncorroborated; rank Independent-Primary evidence first; corroboration counts independent chains, so two sources tracing to the same PR/dataset = one chain, not two. Deprioritize ≠ delete — keep the weaker source, annotated.

Anti-hallucination protocol:

• Every factual claim requires a [N] citation in the same sentence
• Distinguish fact (cited) from synthesis (your analysis connecting facts) from speculation (explicitly labeled)
• If you can't verify a claim, flag it: "uncertain — could not verify"
• Never fabricate citations. If you read something but lost the URL, say so rather than inventing one

Citation hygiene (check before packaging):

• Every source in the Sources list must be cited at least once in the body text. If a source isn't cited, either cite it where relevant or remove it — orphaned sources erode trust.
• Every [N] in the body must have a corresponding entry in Sources. No phantom references.
• Scan your draft for uncited factual claims (numbers, percentages, dates, named findings). Each one needs a [N] or an explicit "based on the author's analysis" qualifier.

Phase 5: Package

Produce the final report using the structure in [Report Format](#report-format) below.

For long reports (>5K words): Write each section individually to disk using the Edit tool, building the report progressively. This prevents context overflow and ensures nothing gets lost.

Before finalizing, run the pre-publish checklist (ALL must pass):

1. Minimum source count reached (10 for standard, or user-specified number)
2. All sub-questions answered with adequate source support
3. At least 2-3 search iterations completed (not just one pass)
4. Major contradictions investigated and explained (not hidden)
5. Conflicting information resolved or explicitly acknowledged
6. Could you defend each conclusion if challenged? If not, add evidence or a confidence qualifier
7. Citation audit: every source in the list is cited in the body; every [N] in the body has a source (strip any ⚠flag suffix inside the bracket before matching [N]↔Sources). No orphans in either direction
8. Source diversity: no single domain accounts for >25% of sources
9. Geographic scope: if the topic is global, non-US perspectives are represented (or the US-focus is explicitly flagged)
10. Credibility gate: every load-bearing conclusion has ≥1 Independent corroboration chain, OR is explicitly written as "X claims…" / flagged ⚠uncorroborated. No corporate-blog claim about its own category is restated as bare fact. (A disinterested practitioner's reasoning/recommendation may be stated with plain attribution — "Author argues…" — not hedged like a vendor's self-interested claim; the gate targets conflict of interest, not all non-primary content.)
11. Anti-Goodhart: if the topic genuinely has no Independent source, conclusions are stamped low-confidence with the conflict named — and no Interested source was reclassified as "Independent" just to pass item 10.
12. Exec-summary caveat + accounting: no Interested-only finding headlines the Executive Summary without a caveat; Research Metadata reports the P/S/T × Independent/Interested distribution.

---

Deep Mode (8 phases)

For high-stakes research where being wrong is expensive. Read references/deep-mode.md for detailed subagent instructions before proceeding.

Phase 1: Scope & Decompose

Same as Standard Phase 1, but decompose into 8-12 sub-questions organized into 3-4 research threads.

Phase 2: Plan & Assign

Design the research strategy. Create a research plan that assigns sub-questions to parallel subagents.

Subagent design principles (from Anthropic's multi-agent research):

• Each subagent gets a specific objective, output format, tool guidance, and clear boundaries
• Vague instructions like "research topic X" cause duplication and gaps
• Assign 2-3 sub-questions per subagent, grouped by theme
• Include one dedicated Knowledge Gap Agent that reviews all intermediate findings and identifies what's missing

Phase 3: Parallel Retrieve

Launch subagents via the Agent tool. Each subagent follows the Standard Mode phases 2-4 independently.

Subagent prompt template:

You are a research subagent investigating: [specific sub-questions]

Context: [research brief, what other subagents are covering]

Instructions:
1. Search for information using mcp__exa__web_search_exa and WebSearch
2. Read full pages with WebFetch for the most relevant results
3. For each claim, note the source URL, author, and your confidence
4. Flag any contradictions or surprising findings
5. Write your findings as structured notes (not a polished report)

Output format:
## Findings
[For each sub-question: answer, evidence, sources, confidence (high/medium/low)]

## Contradictions & Surprises
[Anything unexpected or conflicting]

## Source List
[URL, title, type, authority (P/S/T), independence (Ind/Int/Unknown), sub-flags]

Save output to: [workspace path]

Launch all research subagents in a single message for maximum parallelism.

Phase 4: Triangulate

After subagents return, cross-reference findings — weighting by the Source-Vetter ledger, and counting independent evidence chains, not raw sources (sources tracing to the same PR/dataset/author = one chain):

• 3+ independent chains, at least one Independent-Primary → high confidence
• 2 independent chains → medium confidence
• Single Independent-Primary chain → at least medium — thin but trustworthy (rubric rule 6: don't crush a lone strong source like a lone vendor blog)
• Single Interested/Unknown chain, or all-Interested chains → low; flag for verification or qualify heavily ("X claims…")
• Direct contradictions → investigate deeper (may need additional searches)
• An interested-only claim never reaches "high confidence" on volume alone — count the chains, not the citations.

Phase 5: Knowledge Gap Analysis

Review all findings and identify:

• Sub-questions with thin or single-source answers
• Areas where only secondary sources were found
• Contradictions that weren't resolved
• Angles that weren't explored

Launch targeted follow-up searches to fill gaps. This is the phase that separates thorough research from surface-level summarization.

Phase 6: Synthesize (UNION Merge)

For deep mode, use the UNION merge technique — instead of synthesizing findings into a single draft yourself, launch 2-3 subagents that each independently write the complete report from the collected evidence. Then merge:

1. Launch 2-3 synthesis subagents, each with access to ALL research findings and the Source-Vetter ledger (s

…

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: kirillgreen
• Source: kirillgreen/skills
• License: CC0-1.0

Install and usage instructions live in the source repository linked above.