Qa Sweep

qa-sweep

Run a batch of narrowly-scoped QA sub-agents against a built devboy binary, each chasing one class of regression, and merge their findings into a single bug log. The skill does not exercise third-party provider APIs by itself — it focuses on contract / hygiene / schema-drift regressions that the unit test suite does not catch (exit codes, stdout vs stderr separation, ProviderUnsupported fallbacks, schema ↔ executor mismatches, etc.).

Unlike daily-report (trace-driven retrospective) and retro (multi-day pattern detector), this skill is execution-driven: it spins up the CLI many times with crafted inputs, diffs observed behaviour against a documented contract, and records every mismatch.

When to use

• Right before a release: "give me every regression you can find before we tag 1.N.0".
• After a large merge (epic, stacked series, rename / refactor) that touched many subcommands.
• After a CI matrix expansion, when you want a behavioural smoke pass beyond "unit tests green".
• On demand when a user reports a vague "CLI feels off" — this skill's output gives an evidence-based triage.

Not a substitute for:

• cargo test / cargo clippy / cargo fmt --check (the skill assumes those already passed).
• Provider-specific integration tests with real credentials (out of scope — each sub-agent is opaque to the configured provider set; it uses local fakes or treats live providers as optional).

Inputs

The skill takes three optional inputs, all with sensible defaults:

• --binary — which devboy to test. Default: ./target/release/devboy, falling back to $PATH.
• --bug-log — where the merged findings go. Default: /tmp/devboy-qa/BUGS_FOUND.md.
• --classes — comma-separated list of bug classes to run (see the agent charters below). Default: all of them.

Procedure

1. Sanity-check the binary

Before spinning up any sub-agents, the main agent confirms the binary is invokable and prints a meaningful --version:

DEVBOY="${DEVBOY:-./target/release/devboy}"
"$DEVBOY" --version || { echo "devboy binary at $DEVBOY is not runnable"; exit 1; }

Also snapshots the git SHA of the source tree — every bug-log entry references it so findings are attributable to a specific build.

2. Begin the meta-trace

The sweep itself is a traced session — retros care about how often a QA pass surfaces new findings and how long it takes:

result=$(devboy trace begin --skill qa-sweep)
SESSION_DIR=$(echo "$result" | jq -r .session_dir)
SESSION_ID=$(echo "$result" | jq -r .session_id)

Record a decision event listing which classes will run.

3. Fan out sub-agents — one per bug class

Each class gets its own sub-agent invocation (Claude Code: Agent tool; other runtimes: equivalent task / subprocess primitive). They run in parallel — the charters are independent and non-destructive. Each sub-agent gets:

• The path to the binary.
• A writable scratch directory (its own — never shared).
• The bug-log path (append-only, each agent writes its own section).
• Permission to use $HOME, $TMPDIR, /tmp — nothing that modifies a real project.

Launch all sub-agents in one fan-out; the main agent then waits for every report.

3.A exit-codes — Shell scripting readiness

Charter. Every error path must return non-zero. Shell scripts cannot differentiate success from failure if the CLI always exits 0.

Probe set (non-exhaustive):

| Case | Invocation | |------|------------| | unknown skill | devboy skills show bogus-skill | | unknown tool | devboy tools call bogus_tool '{}' | | missing required arg | devboy tools call (no NAME) | | malformed JSON arg | devboy tools call get_issues 'not-json' | | unknown context | devboy context use unknown | | unknown agent flag | devboy skills install x --agent bogus --dry-run | | conflicting flags | devboy skills install x --global --local --dry-run | | no args in install | devboy skills install | | install missing skill | devboy skills install nonexistent --dry-run | | remove missing skill --strict | devboy skills remove nonexistent --global --strict --dry-run | | empty stdin for pipe | echo '' \| devboy format-pipeline | | bad stdin JSON | echo 'bad' \| devboy format-pipeline | | 401 from provider | DEVBOY_GITHUB_TOKEN=bad devboy test github | | tools/call with isError: true | call any tool unsupported by the configured provider |

Expected: every row → exit code != 0.

Report shape: per failing row — the invocation, the stderr, the observed exit code, and (if the agent can infer it) the call chain that dropped the error.

3.B stdout-hygiene — Pipe-ability

Charter. Any subcommand whose output is meant to be parsed by a script must not mix tracing logs into stdout. The canonical test is cmd | jq . — if jq rejects the first line, hygiene is broken.

Probe set:

| Invocation | Expected | |------------|----------| | devboy tools call get_issues '{"limit":1}' | pure JSON on stdout | | devboy tools list | tabular / JSON, no interleaved INFO/WARN | | devboy tools call get_issue '{"key":""}' | pure JSON | | devboy format-pipeline (with valid JSON stdin) | pure TOON / JSON output | | devboy proxy status --json | pure JSON | | devboy mcp (one initialize + one tools/list) | every line on stdout must parse as JSON-RPC |

Report: for each broken invocation, a diff of where the noise starts and the env / subscriber config that routes it to the wrong stream.

3.C error-propagation — Upstream failures surface to the caller

Charter. When a provider returns a real error (NotFound, InvalidData, Http, Unauthorized), the caller must see that error — not a generic "no provider supports X" fallback from should_try_next_provider.

Probe set:

• tools call get_pipeline '{"branch":"empty-branch"}' — expect a concrete NotFound(...) message, not "No provider supports 'get_pipeline'".
• DEVBOY_GITHUB_TOKEN=ghp_bad tools call get_issue '{"key":"gh#1"}' → Unauthorized text.
• tools call get_merge_request_diffs '{"key":"pr#999999"}' → concrete NotFound, not a provider-skipping fallback.
• tools call get_structure_forest '{"structureId":1}' against a GitHub-only setup → ProviderUnsupported IS acceptable here (the provider legitimately does not implement the tool).

Report: the invocation, the error text the user saw, and whether it matches the expected variant. False-positive "No provider supports …" messages are the highest-severity finding.

3.D schema-sync — Tool schema vs executor params

Charter. For every tool in devboy tools list, the arg names the schema declares must be exactly the arg names the executor deserialises — camelCase vs snake_case mismatches silently drop parameters through unwrap_or_default() in the current code.

Procedure:

1. Run devboy mcp with an initialize + tools/list stdin sequence; capture every inputSchema.properties..
2. For each tool, craft a minimal payload that exercises each declared parameter.
3. Call the tool via devboy tools call '' against a local fake provider (GitHub test repo is OK) — compare the response against what each param should have done.
4. Flag any parameter that was silently ignored (e.g. a state value that did not actually filter).

Report: per tool, the full declared schema vs the names the executor actually honours.

3.E help-accuracy — --help vs reality

Charter. Every --help page should accurately describe what the subcommand does. --global is not "upgrade everything across every recorded target"; it is "target ~/.agents/skills/".

Procedure:

• Enumerate every devboy [--subsubcommand] --help.
• Extract the verbs ("Creates", "Returns", "Fails if …").
• Run the command in a controlled temp dir and check each verb.
• For flag descriptions, run with and without the flag — the described behaviour should match the observed diff.

Report: per mismatch, the help text and the contradicting observation.

3.F config-resolution — Where does .devboy.toml come from?

Charter. All subcommands should agree on which .devboy.toml is active. Current bugs: config list/config path look only in the global config, while tools call/context list/test walk up from cwd — and cwd discovery can walk into an unrelated parent project.

Procedure:

• Create three isolated dirs: /tmp/a (empty), /tmp/a/b (contains .devboy.toml), /tmp/a/b/c (empty, subdir of b).
• From each directory, run config list, config path, tools call get_issues, context list, test github, doctor.
• Record which .devboy.toml each subcommand resolved.

Report: the resolution matrix. Inconsistencies are bugs.

3.G credential-resolution — env vars vs keychain

Charter. DEVBOY__TOKEN env vars should be honoured by every subcommand that consults credentials (not just test ). devboy doctor should report the same credential state that tools call actually uses.

Procedure:

• Set DEVBOY_GITHUB_TOKEN=; no keychain entry.
• Run devboy test github (expect PASS), devboy tools call get_issues '{}' (expect real data), devboy doctor (expect "GitHub token present").

Report: per subcommand, "honours env var" / "does not".

3.H skills-lifecycle — Install idempotence

Charter. Install is idempotent; re-install of the same bytes is a no-op; re-install of changed bytes respects --force; manifest stays in sync with disk.

Procedure (per target: --global, --agent claude, --agent all):

1. Fresh install → expect installed outcomes + manifest present.
2. Re-install → expect unchanged outcomes; manifest unchanged.
3. Edit a file → re-install without --force → expect skipped (user-modified).
4. Re-install with --force → expect forced.
5. Remove → expect files gone; manifest entry gone.

Compare the manifest SHA256 against the shipped history.json at each step.

Report: any step that does not match the contract above.

4. Collect findings

Each sub-agent appends a section to the bug log in this format:

## qa-sweep /  — 

**Run:**  — binary  @ 
**Status:** FOUND | CLEAN

### Findings

- **[SEVERITY]** *Component* — one-sentence summary
  - **Repro:** 
  - **Expected:** 
  - **Actual:** 
  - **Hint:** 

Severity scale: BLOCKER (release gate), CRITICAL, MAJOR, MINOR, COSMETIC.

5. Merge + summarise

The main agent:

1. Reads each sub-agent's section.
2. Collapses duplicates (two agents occasionally flag the same root cause — merge into one entry with the broader repro list).
3. Writes a header block: total findings, per-severity counts, class-level summary.
4. Ends the meta-trace (devboy trace end ... --outcome success --summary " findings across classes").

6. Return a quick-read summary

After the bug log is written, the main agent prints a short text to stdout:

QA sweep: 17 findings (2 blocker, 3 critical, 9 major, 3 minor)
 - exit-codes: 5 findings
 - stdout-hygiene: 2 findings (1 critical)
 - error-propagation: 2 findings (1 critical)
 - schema-sync: 7 findings (2 blocker)
 - help-accuracy: 1 finding
 - config-resolution: 0 findings ✓
 - credential-resolution: 1 finding
 - skills-lifecycle: 0 findings ✓

Full log: /tmp/devboy-qa/BUGS_FOUND.md

Success criteria

• Every requested class ran; every one produced either a non-empty findings list or a Status: CLEAN marker. Silent skips are not acceptable.
• The bug log file is created / appended to atomically — concurrent sub-agents never clobber each other's section.
• Every finding has a deterministic repro (exact commands + env vars + cwd) so a second run on the same commit reproduces the same output.
• The summary line counts match the per-class section totals.
• The meta-trace has one start, one decision, one note per sub-agent (status + finding count), one end.

Guardrails

• No real writes to third-party providers unless the operator explicitly passes --allow-writes. The default test repo for live provider calls must be scoped by env var (DEVBOY_QA_TEST_REPO=owner/repo) so a typo cannot spam a production project.
• No secret values in the bug log. Env vars holding tokens are captured by name only; their values are elided. The trace redactor already covers the meta-trace; sub-agents must mirror the same discipline on their own stdout / stderr captures.
• Scratch dirs are cleaned up between sub-agents — no cross-contamination of HOME / XDG_CONFIG_HOME / .devboy.toml search paths.
• Stop on binary mismatch. If any sub-agent detects it is testing a binary whose git SHA differs from the one the main agent captured in step 1, it exits immediately with FOUND BLOCKER: binary swapped mid-sweep.
• Never delete the bug log. Overwrites are allowed only with an explicit --reset flag.

Non-goals

• Not a unit-test replacement. Individual unwrap() / off-by-one / rare deserialisation edge cases are the province of cargo test; this skill is for behavioural hygiene only.
• Not a provider conformance suite. Live provider edge cases (GitHub Projects v2 quirks, GitLab rate-limit headers, Jira ADF rendering) need dedicated integration tests — the sub-agents here use at most one provider happy path to anchor each class.
• Not a performance benchmark. devboy benchmark already covers the format pipeline; latency / throughput findings are out of scope.
• Not a fix pipeline. Sub-agents report; they never open issues, push branches, or edit source files. The user decides what to triage from the bug log.

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: meteora-pro
• Source: meteora-pro/devboy-tools
• License: Apache-2.0
• Homepage: https://meteora-pro.github.io/devboy-tools/

Install and usage instructions live in the source repository linked above.