Tapeout Precheck

Tapeout Precheck

Overview

Tapeout is irreversible and expensive. The precheck is the last gate where a tool, not a person, confirms the layout obeys the foundry rules and matches the schematic. The job is to pass that gate honestly, because the alternative is paying for a respin to learn what the checker already knew.

Core principle: A physical-verification failure is the design telling you it's wrong. Fix the design, never the checker. Every disabled rule is a defect you chose to ship.

When to Use

• Preparing a GDS for an MPW shuttle or full-mask submission
• Running DRC (design rule check) or LVS (layout vs schematic) signoff
• Packaging the submission (GDS, top-cell name, layer map, fill, metadata)
• Tempted to wave, downgrade, or disable a DRC/LVS violation to make a deadline

The Signoff Gate, In Order

1. DRC clean. Geometry obeys the foundry rules (spacing, width, density, antenna, latchup). Zero unwaived violations.
2. LVS clean. The extracted layout netlist matches the schematic/source netlist exactly: same devices, same connectivity, no shorts, no opens, no unintended merges.
3. Density / fill. Metal density windows satisfied, fill added without creating new violations.
4. Submission package. Correct top-cell name, layer mapping, and the foundry's required metadata and file format. A perfect GDS rejected for a wrong top-cell name is a wasted shuttle slot.

A precheck step may be a no-op for a given flow (some shuttles run DRC on their side), but treat it as a real gate: know which checks run where, and don't assume "no errors printed" means "checked."

Never Flatten Or Merge Std-Cell Metal

This is the rule that quietly destroys a chip:

Do not flatten standard cells and then merge their metal layers across cell boundaries. The std cells were verified as discrete cells with defined pins. Flatten-and-merge can short nets that the cell library kept apart and break the device-to-net correspondence LVS relies on. The result is an LVS mismatch at best, a silently shorted net at worst. Keep cells as instances; route between their pins. Let the router own inter-cell metal, not a flattening pass.

Failures Must Fail

There is no ERROR_ON_DRC=false, no "skip antenna for now," no waiver-without-foundry-signoff. Those knobs convert a real, known defect into a green checkmark, which is the most dangerous output a tapeout flow can produce.

• If a check fails, the design is wrong. Fix the design.
• A legitimate waiver is one the foundry has explicitly granted in writing, recorded with its rule and rationale, not a flag you flipped to hit a date.
• Trust the logs. Read what the checker actually reported; don't pattern-match "0 errors" from a run that skipped the rule deck.

Red Flags

| Smell | Do instead | |-------|------------| | Disabling a DRC rule to pass | Fix the geometry | | Flatten + merge metal across std cells | Keep cells as instances, route between pins | | "LVS is close enough" | LVS must match exactly | | Assuming a no-op precheck checked something | Know which checks run where | | Self-granted waiver to hit a deadline | Only foundry-granted, written waivers | | Wrong top-cell/layer map in the package | Validate the submission package against foundry spec |

Midstall House Style

• wafer.space is the reference shuttle flow: a precheck stage (DRC may be a no-op there), explicit submission requirements, and the strict no-skip-the-check discipline.
• Never flatten and merge std-cell metal; it breaks LVS and shorts nets. This is a hard rule.
• No em dashes, no emoji. The failures-should-fail stance is shared with silicon-grade-discipline.

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: Midstall
• Source: Midstall/claude-for-hardware
• License: Apache-2.0

Install and usage instructions live in the source repository linked above.