Setup Timescaledb Hypertables

TimescaleDB Complete Setup

Instructions for insert-heavy data patterns where data is inserted but rarely changed:

• Time-series data (sensors, metrics, system monitoring)
• Event logs (user events, audit trails, application logs)
• Transaction records (orders, payments, financial transactions)
• Sequential data (records with auto-incrementing IDs and timestamps)
• Append-only datasets (immutable records, historical data)

Step 1: Create Hypertable

CREATE TABLE your_table_name (
    timestamp TIMESTAMPTZ NOT NULL,
    entity_id TEXT NOT NULL,          -- device_id, user_id, symbol, etc.
    category TEXT,                    -- sensor_type, event_type, asset_class, etc.
    value_1 DOUBLE PRECISION,         -- price, temperature, latency, etc.
    value_2 DOUBLE PRECISION,         -- volume, humidity, throughput, etc.
    value_3 INTEGER,                  -- count, status, level, etc.
    metadata JSONB                    -- flexible additional data
) WITH (
    tsdb.hypertable,
    tsdb.partition_column='timestamp',
    tsdb.enable_columnstore=true,     -- Disable if table has vector columns
    tsdb.segmentby='entity_id',       -- See selection guide below
    tsdb.orderby='timestamp DESC',     -- See selection guide below
    tsdb.sparse_index='minmax(value_1),minmax(value_2),minmax(value_3)' -- see selection guide below
);

Compression Decision

• Enable by default for insert-heavy patterns
• Disable if table has vector type columns (pgvector) - indexes on vector columns incompatible with columnstore

Partition Column Selection

Must be time-based (TIMESTAMP/TIMESTAMPTZ/DATE) or integer (INT/BIGINT) with good temporal/sequential distribution.

Common patterns:

• TIME-SERIES: timestamp, event_time, measured_at
• EVENT LOGS: event_time, created_at, logged_at
• TRANSACTIONS: created_at, transaction_time, processed_at
• SEQUENTIAL: id (auto-increment when no timestamp), sequence_number
• APPEND-ONLY: created_at, inserted_at, id

Less ideal: ingested_at (when data entered system - use only if it's your primary query dimension) Avoid: updated_at (breaks time ordering unless it's primary query dimension)

Segment_By Column Selection

PREFER SINGLE COLUMN - multi-column rarely optimal. Multi-column can only work for highly correlated columns (e.g., metricname + metrictype) with sufficient row density.

Requirements:

• Frequently used in WHERE clauses (most common filter)
• Good row density (>100 rows per value per chunk)
• Primary logical partition/grouping

Examples:

• IoT: device_id
• Finance: symbol
• Metrics: service_name, service_name, metric_type (if sufficient row density), metric_name, metric_type (if sufficient row density)
• Analytics: user_id if sufficient row density, otherwise session_id
• E-commerce: product_id if sufficient row density, otherwise category_id

Row density guidelines:

• Target: >100 rows per segment_by value within each chunk.
• Poor: ...

-- ↳ segmentby: entityid (if >100 rows per chunk)

**Avoid:** timestamps, unique IDs, low-density columns (,  90).
- minmax for fields that are highly correlated with segmentby and orderby columns (e.g. if orderby includes `created_at`, minmax on `updated_at` is useful).

**Avoid:** rarely filtered columns.

IMPORTANT: NEVER index columns in segmentby or orderby. Orderby columns will always have minmax indexes without any configuration.

**Configuration:**
The format is a comma-separated list of type_of_index(column_name).

```sql
ALTER TABLE table_name SET (
    timescaledb.sparse_index = 'minmax(value_1),minmax(value_2)'
);

Explicit configuration available since v2.22.0 (was auto-created since v2.16.0).

Chunk Time Interval (Optional)

Default: 7 days (use if volume unknown, or ask user). Adjust based on volume:

• High frequency: 1 hour - 1 day
• Medium: 1 day - 1 week
• Low: 1 week - 1 month

SELECT set_chunk_time_interval('your_table_name', INTERVAL '1 day');

Good test: recent chunk indexes should fit in less than 25% of RAM.

Indexes & Primary Keys

Common index patterns - composite indexes on an id and timestamp:

CREATE INDEX idx_entity_timestamp ON your_table_name (entity_id, timestamp DESC);

Important: Only create indexes you'll actually use - each has maintenance overhead.

Primary key and unique constraints rules: Must include partition column.

Option 1: Composite PK with partition column

ALTER TABLE your_table_name ADD PRIMARY KEY (entity_id, timestamp);

Option 2: Single-column PK (only if it's the partition column)

CREATE TABLE ... (id BIGINT PRIMARY KEY, ...) WITH (tsdb.partition_column='id');

Option 3: No PK: strict uniqueness is often not required for insert-heavy patterns.

Step 2: Compression Policy (Optional)

IMPORTANT: If you used tsdb.enable_columnstore=true in Step 1, starting with TimescaleDB version 2.23 a columnstore policy is automatically created with after => INTERVAL '7 days'. You only need to call add_columnstore_policy() if you want to customize the after interval to something other than 7 days.

Set after interval for when: data becomes mostly immutable (some updates/backfill OK) AND B-tree indexes aren't needed for queries (less common criterion).

-- In TimescaleDB 2.23 and later only needed if you want to override the default 7-day policy created by tsdb.enable_columnstore=true
-- Remove the existing auto-created policy first:
-- CALL remove_columnstore_policy('your_table_name');
-- Then add custom policy:
-- CALL add_columnstore_policy('your_table_name', after => INTERVAL '1 day');

Step 3: Retention Policy

IMPORTANT: Don't guess - ask user or comment out if unknown.

-- Example - replace with requirements or comment out
SELECT add_retention_policy('your_table_name', INTERVAL '365 days');

Step 4: Create Continuous Aggregates

Use different aggregation intervals for different uses.

Short-term (Minutes/Hours)

For up-to-the-minute dashboards on high-frequency data.

CREATE MATERIALIZED VIEW your_table_hourly
WITH (timescaledb.continuous) AS
SELECT
    time_bucket(INTERVAL '1 hour', timestamp) AS bucket,
    entity_id,
    category,
    COUNT(*) as record_count,
    AVG(value_1) as avg_value_1,
    MIN(value_1) as min_value_1,
    MAX(value_1) as max_value_1,
    SUM(value_2) as sum_value_2
FROM your_table_name
GROUP BY bucket, entity_id, category;

Long-term (Days/Weeks/Months)

For long-term reporting and analytics.

CREATE MATERIALIZED VIEW your_table_daily
WITH (timescaledb.continuous) AS
SELECT
    time_bucket(INTERVAL '1 day', timestamp) AS bucket,
    entity_id,
    category,
    COUNT(*) as record_count,
    AVG(value_1) as avg_value_1,
    MIN(value_1) as min_value_1,
    MAX(value_1) as max_value_1,
    PERCENTILE_CONT(0.5) WITHIN GROUP (ORDER BY value_1) as median_value_1,
    PERCENTILE_CONT(0.95) WITHIN GROUP (ORDER BY value_1) as p95_value_1,
    SUM(value_2) as sum_value_2
FROM your_table_name
GROUP BY bucket, entity_id, category;

Step 5: Aggregate Refresh Policies

Set up refresh policies based on your data freshness requirements.

start_offset: Usually omit (refreshes all). Exception: If you don't care about refreshing data older than X (see below). With retention policy on raw data: match the retention policy.

endoffset: Set beyond active update window (e.g., 15 min if data usually arrives within 10 min). Data newer than endoffset won't appear in queries without real-time aggregation. If you don't know your update window, use the size of the time_bucket in the query, but not less than 5 minutes.

scheduleinterval: Set to the same value as the endoffset but not more than 1 hour.

Hourly - frequent refresh for dashboards:

SELECT add_continuous_aggregate_policy('your_table_hourly',
    start_offset => NULL,
    end_offset => INTERVAL '15 minutes',
    schedule_interval => INTERVAL '15 minutes');

Daily - less frequent for reports:

SELECT add_continuous_aggregate_policy('your_table_daily',
    start_offset => NULL,
    end_offset => INTERVAL '1 hour',
    schedule_interval => INTERVAL '1 hour');

Use start_offset only if you don't care about refreshing old data Use for high-volume systems where query accuracy on older data doesn't matter:

-- the following aggregate can be stale for data older than 7 days
-- SELECT add_continuous_aggregate_policy('aggregate_for_last_7_days',
--     start_offset => INTERVAL '7 days',    -- only refresh last 7 days (NULL = refresh all)
--     end_offset => INTERVAL '15 minutes',
--     schedule_interval => INTERVAL '15 minutes');

IMPORTANT: you MUST set a startoffset to be less than the retention policy on raw data. By default, set the startoffset equal to the retention policy. If the retention policy is commented out, comment out the start_offset as well. like this:

SELECT add_continuous_aggregate_policy('your_table_daily',
    start_offset => NULL,    -- Use NULL to refresh all data, or set to retention period if enabled on raw data
--  start_offset => INTERVAL '',    -- uncomment if retention policy is enabled on the raw data table
    end_offset => INTERVAL '1 hour',
    schedule_interval => INTERVAL '1 hour');

Step 6: Real-Time Aggregation (Optional)

Real-time combines materialized + recent raw data at query time. Provides up-to-date results at the cost of higher query latency.

More useful for fine-grained aggregates (e.g., minutely) than coarse ones (e.g., daily/monthly) since large buckets will be mostly incomplete with recent data anyway.

Disabled by default in v2.13+, before that it was enabled by default.

Use when: Need data newer than end_offset, up-to-minute dashboards, can tolerate higher query latency Disable when: Performance critical, refresh policies sufficient, high query volume, missing and stale data for recent data is acceptable

Enable for current results (higher query cost):

ALTER MATERIALIZED VIEW your_table_hourly SET (timescaledb.materialized_only = false);

Disable for performance (but with stale results):

ALTER MATERIALIZED VIEW your_table_hourly SET (timescaledb.materialized_only = true);

Step 7: Compress Aggregates

Rule: segmentby = ALL GROUP BY columns except timebucket, orderby = timebucket DESC

-- Hourly
ALTER MATERIALIZED VIEW your_table_hourly SET (
    timescaledb.enable_columnstore,
    timescaledb.segmentby = 'entity_id, category',
    timescaledb.orderby = 'bucket DESC'
);
CALL add_columnstore_policy('your_table_hourly', after => INTERVAL '3 days');

-- Daily
ALTER MATERIALIZED VIEW your_table_daily SET (
    timescaledb.enable_columnstore,
    timescaledb.segmentby = 'entity_id, category',
    timescaledb.orderby = 'bucket DESC'
);
CALL add_columnstore_policy('your_table_daily', after => INTERVAL '7 days');

Step 8: Aggregate Retention

Aggregates are typically kept longer than raw data. IMPORTANT: Don't guess - ask user or you MUST comment out if unknown.

-- Example - replace or comment out
SELECT add_retention_policy('your_table_hourly', INTERVAL '2 years');
SELECT add_retention_policy('your_table_daily', INTERVAL '5 years');

Step 9: Performance Indexes on Continuous Aggregates

Index strategy: Analyze WHERE clauses in common queries → Create indexes matching filter columns + time ordering

Pattern: (filter_column, bucket DESC) supports WHERE filter_column = X AND bucket >= Y ORDER BY bucket DESC

Examples:

CREATE INDEX idx_hourly_entity_bucket ON your_table_hourly (entity_id, bucket DESC);
CREATE INDEX idx_hourly_category_bucket ON your_table_hourly (category, bucket DESC);

Multi-column filters: Create composite indexes for WHERE entity_id = X AND category = Y:

CREATE INDEX idx_hourly_entity_category_bucket ON your_table_hourly (entity_id, category, bucket DESC);

Important: Only create indexes you'll actually use - each has maintenance overhead.

Step 10: Optional Enhancements

Space Partitioning (NOT RECOMMENDED)

Only for query patterns where you ALWAYS filter by the space-partition column with expert knowledge and extensive benchmarking. STRONGLY prefer time-only partitioning.

Step 11: Verify Configuration

-- Check hypertable
SELECT * FROM timescaledb_information.hypertables
WHERE hypertable_name = 'your_table_name';

-- Check compression settings
SELECT * FROM hypertable_compression_stats('your_table_name');

-- Check aggregates
SELECT * FROM timescaledb_information.continuous_aggregates;

-- Check policies
SELECT * FROM timescaledb_information.jobs ORDER BY job_id;

-- Monitor chunk information
SELECT
    chunk_name,
    range_start,
    range_end,
    is_compressed
FROM timescaledb_information.chunks
WHERE hypertable_name = 'your_table_name'
ORDER BY range_start DESC;

Performance Guidelines

• Chunk size: Recent chunk indexes should fit in less than 25% of RAM
• Compression: Expect 90%+ reduction (10x) with proper columnstore config
• Query optimization: Use continuous aggregates for historical queries and dashboards
• Memory: Run timescaledb-tune for self-hosting (auto-configured on cloud)

Schema Best Practices

Do's and Don'ts

• ✅ Use TIMESTAMPTZ NOT timestamp
• ✅ Use >= and < NOT BETWEEN for timestamps
• ✅ Use TEXT with constraints NOT char(n)/varchar(n)
• ✅ Use snake_case NOT CamelCase
• ✅ Use BIGINT GENERATED ALWAYS AS IDENTITY NOT SERIAL
• ✅ Use BIGINT for IDs by default over INTEGER or SMALLINT
• ✅ Use DOUBLE PRECISION by default over REAL/FLOAT
• ✅ Use NUMERIC NOT MONEY
• ✅ Use NOT EXISTS NOT NOT IN
• ✅ Use time_bucket() or date_trunc() NOT timestamp(0) for truncation

API Reference (Current vs Deprecated)

Deprecated Parameters → New Parameters:

• timescaledb.compress → timescaledb.enable_columnstore
• timescaledb.compress_segmentby → timescaledb.segmentby
• timescaledb.compress_orderby → timescaledb.orderby

Deprecated Functions → New Functions:

• add_compression_policy() → add_columnstore_policy()
• remove_compression_policy() → remove_columnstore_policy()
• compress_chunk() → convert_to_columnstore() (use with CALL, not SELECT)
• decompress_chunk() → convert_to_rowstore() (use with CALL, not SELECT)

Compression Stats (use functions, not views):

• Use function: hypertable_compression_stats('table_name')
• Use function: chunk_compression_stats('_timescaledb_internal._hyper_X_Y_chunk')
• Note: Views like columnstore_settings may not be available in all versions; use functions instead

Manual Compression Example:

-- Compress a specific chunk
CALL convert_to_columnstore('_timescaledb_internal._hyper_7_1_chunk');

-- Check compression statistics
SELECT
    number_compressed_chunks,
    pg_size_pretty(before_compression_total_bytes) as before_compression,
    pg_size_pretty(after_compression_total_bytes) as after_compression,
    ROUND(100.0 * (1 - after_compression_total_bytes::numeric / NULLIF(before_compression_total_bytes, 0)), 1) as compression_pct
FROM hypertable_compression_stats('your_table_name');

Questions to Ask User

1. What kind of data will you be storing?
2. How do you expect to use the data?
3. What queries will you run?
4. How long to keep the data?
5. Column types if unclear

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: timescale
• Source: timescale/pg-aiguide
• License: Apache-2.0

Install and usage instructions live in the source repository linked above.