Omh Ralph

OMH Ralph — Verified Execution (v2)

> Requires the OMH plugin. Install plugins/omh/ from this repo to > ~/.hermes/plugins/omh/.

When to Use

• You have a plan (from omh-ralplan or manual) and need verified execution
• The user says: "ralph", "don't stop", "until done", "must complete", "keep going"
• You need guaranteed verification — not just "looks done" but evidence-backed completion
• Multi-step implementation where each task must be independently verified

When NOT to Use

• No plan or spec exists (use omh-deep-interview and/or omh-ralplan first)
• Trivial single-file changes (just do them directly)
• The user explicitly wants to skip verification

Architecture: One Task Per Invocation

Each ralph invocation does ONE unit of work and exits. The caller re-invokes for the next task. This eliminates context window exhaustion and makes every invocation a clean checkpoint.

Invocation N:  read state → pick task → execute → verify → update state → EXIT
Invocation N+1: read state → pick next task → execute → verify → update state → EXIT
...
Final invocation: all tasks pass → architect review → mark complete → EXIT

Procedure

Step 0: Resolve Instance and Acquire Lock

Ralph and autopilot mutate a shared .omh/plans/ plan. Two sessions running ralph against the same plan would race on ralph-tasks state and produce non-deterministic outcomes. Use per-instance state + advisory lock to make concurrent plans safe.

1. Resolve instance_id from the plan path:

• Default plan source: .omh/plans/ralplan-*.md or .omh/plans/ralph-plan.md.
• instance_id = basename(plan_path) without ".md" (engine slugifies).
• If no plan exists yet (Step 2 will choose), use instance_id="default".

1. Acquire the lock before reading/writing state:

`` lock = omh_state(action="lock", mode="ralph", lock_key="{instance_id}", session_id="{HERMES_SESSION_ID or uuid}", holder_note="ralph executing {plan_path}") ``

• acquired=true: continue.
• acquired=false: report held_by to the user (pid + session_id +

started_at). Offer: wait / cancel the holder (omh_state(action="cancel", mode="ralph", instance_id="{instance_id}"), then on next invocation the dead holder's lock will be released automatically by stale-pid detection) / pick a different plan.

1. **Pass instance_id to every subsequent omh_state call in this

invocation** — both the ralph mode and the ralph-tasks mode.

1. Release the lock at every exit point (success, blocked, cancel,

max-iterations, exception): `` omh_state(action="unlock", mode="ralph", lock_key="{instance_id}", session_id="{HERMES_SESSION_ID or uuid}") `` Wrap the body of the procedure so the unlock fires even on error.

> Singleton fallback (legacy). If a caller omits instance_id, > the engine writes the legacy .omh/state/ralph-state.json and skips > locking. Only use this for one-plan-at-a-time setups.

Step 1: Read State

state = omh_state(action="read", mode="ralph", instance_id="{instance_id}")

• state.exists=false: Fresh start — go to Step 2 (Planning Gate).
• state.data.active=true: Resume — go to Step 3.
• state.data.phase="complete": Report completion. Ask if user wants fresh start.
• state.data.phase="blocked": Report blockers. Ask if issues are resolved.
• state.data.active=false, phase="cancelled": Report cancellation. Offer resume.

Check for cancel signal:

cancel = omh_state(action="cancel_check", mode="ralph", instance_id="{instance_id}")

If cancel.cancelled=true: set phase="cancelled", write state, exit.

Check staleness: if state.stale=true, warn the user and offer to continue or fresh start.

Increment state.data.iteration. If iteration > max_iterations (default 100): write phase="blocked", report "Max iterations reached", exit.

Step 2: Planning Gate

Ralph MUST NOT execute without a plan. Check sources in order:

1. omh_state(action="check", mode="ralph-tasks", instance_id="{instance_id}") → exists=true — already parsed, skip to Step 3
2. .omh/plans/ralplan-*.md — parse into ralph-tasks state: omh_state(action="write", mode="ralph-tasks", instance_id="{instance_id}", data={...})
3. .omh/plans/ralph-plan.md — parse into ralph-tasks state
4. Nothing found → tell user: "No plan found. Run omh-ralplan first."

Plan parsing rules:

• Extract numbered tasks with titles, descriptions, and acceptance criteria
• Reject generic criteria like "implementation is complete" — must be testable
• Enforce atomicity: split multi-part tasks into separate entries
• Assign priorities by dependency order (no-dependency tasks first)
• Set all tasks to passes: false

Write initial state:

omh_state(action="write", mode="ralph", instance_id="{instance_id}", data={
  "active": true, "phase": "execute", "iteration": 0,
  "session_id": "", "max_iterations": 100,
  "task_prompt": "",
  "current_task_id": null,
  "started_at": "",
  "project_path": "",
  "files_modified": [],
  "error_history": [],
  "completed_task_learnings": []
})

Step 3: Pick Next Task

Read task list:

tasks = omh_state(action="read", mode="ralph-tasks", instance_id="{instance_id}")

1. If ALL tasks have passes: true → go to Step 7 (Final Review)
2. Find eligible tasks: passes=false AND all dependencies met
3. If no eligible task but incomplete tasks remain → dependency deadlock → set

phase="blocked", write state, exit

1. Among eligible tasks, pick by priority (lowest number first)

Parallel execution: if 2-3 independent tasks are eligible (no shared file footprint, no dependency between them), batch them into one delegate_task call.

Step 4: Execute

Delegate to an executor subagent:

delegate_task(
    goal="[omh-role:executor] Implement this task:\n\n{task.title}\n{task.description}\n\nAcceptance Criteria:\n{task.acceptance_criteria}",
    context="Project Context:\n{tech stack, conventions, relevant paths}\n\nPrevious Feedback (if retry):\n{task.verifier_verdict}\n\nLearnings from prior tasks:\n{state.data.completed_task_learnings}"
)

The [omh-role:executor] marker in the goal causes the OMH plugin to automatically inject the executor role prompt into the subagent's system prompt — no inlining needed. (Fallback without plugin: replace marker with omh_state(action="load_role", role="executor") and pass the returned prompt text in context.)

Parse the executor's response: COMPLETE → Step 5, PARTIAL → Step 5, BLOCKED → record blocker, add discovered task if needed, update state, exit.

Step 5: Verify

Part A: Gather evidence

evidence = omh_gather_evidence(commands=[
    "{project build command}",
    "{project test command}",
    "{project lint command}"
])

Use the project's actual build/test/lint commands. The tool captures output, enforces timeouts, and returns {results, all_pass, summary}.

Part B: Delegate to verifier

delegate_task(
    goal="[omh-role:verifier] Verify whether this task's acceptance criteria are met:\n\n{task.title}\n{task.acceptance_criteria}\n\nExecutor Report:\n{task.executor_report}",
    context="Evidence:\n{evidence.results}"
)

Parse the verifier's response:

• APPROVE / PASS: Set task.passes = true. Append to learnings:

{task_id, summary, files_changed, gotchas}. Append to .omh/logs/ralph-progress.md.

• REQUEST_CHANGES / FAIL: Record task.verifier_verdict. Check 3-strike rule (Step 6).

Step 6: Error Handling

3-Strike Circuit Breaker: Construct error fingerprint {task_id, category, error_key}. Add to task.error_fingerprints. If 3 fingerprints share the same category + error_key: mark task blocked, log the error, continue to next eligible task on next invocation. If ALL remaining tasks are blocked: write phase="blocked", report, exit.

Cancel detection (if user says "stop", "cancel", "abort"):

omh_state(action="cancel", mode="ralph", instance_id="{instance_id}", reason="user request")

Then write phase="cancelled" to state, exit with resume instructions.

Step 7: Final Review

When all tasks have passes: true:

evidence = omh_gather_evidence(commands=["{build command}", "{test command}"])

delegate_task(
    goal="[omh-role:architect] Review the complete implementation for architectural soundness.\n\nOriginal Plan:\n{source plan text}\n\nTasks Completed:\n{summary of all tasks + learnings}",
    context="Evidence:\n{evidence.results}\n\nFiles Changed Across All Tasks:\n{aggregate file list}"
)

• APPROVE: Write {active: false, phase: "complete"}, clear state files, keep progress log.
• REQUEST_CHANGES: Add new tasks with discovered: true, set phase="execute".

Step 8: Update State and Exit

After every action:

omh_state(action="write", mode="ralph", instance_id="{instance_id}", data={...updated state...})

Exit cleanly. The caller re-invokes for the next iteration.

Pitfalls

• Never skip the planning gate. No plan = no execution.
• Never trust executor claims without verifier evidence. The verifier must see omh_gather_evidence output.
• Don't run evidence inside the verifier delegation. Gather evidence BEFORE delegating.
• Don't conflate verifier and architect. Different jobs, different prompts, different phases.
• Respect the 3-strike rule. Same error 3 times → surface the fundamental issue.
• Feed learnings forward. Include completed_task_learnings in every executor delegation.
• Use [omh-role:NAME] markers — the OMH plugin injects role prompts automatically into subagent sessions. Never inline role prompt text manually. Available roles: executor, verifier, architect, planner, critic, analyst, security-reviewer, code-reviewer, test-engineer, debugger. Fallback without plugin: omh_state(action="load_role", role="NAME") and pass returned prompt in context.

Sentinel Convention

Other skills detect ralph status:

• omh_state(action="check", mode="ralph", instance_id="{instance_id}") → {exists, active, phase, stale}
• phase="complete" → ralph finished successfully
• phase="blocked" → ralph needs intervention

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: witt3rd
• Source: witt3rd/oh-my-hermes
• License: MIT

Install and usage instructions live in the source repository linked above.