Release

Release

Quality gate that validates, fixes, commits, pushes, and opens a request — a pull request on GitHub, a merge request on GitLab. Strict-order phases: lint → type check → tests → commit → release notes → push → request.

Three rules bind every phase:

• Claim a pass only after reading fresh output. Never report "clean" from memory or a previous run.
• Fix problems in the source, never by silencing the tool. Suppression requires the user's explicit approval.
• Root-cause substantive test failures before touching them — route through /diagnosing-bugs.

The issue tracker configuration should have been provided to you. If it is missing: with br installed, treat Beads as the tracker by default (workflows: [issue-tracker-beads.md](../setup-project/issue-tracker-beads.md)) and suggest /setup-project to record the choice; otherwise run /setup-project.

Phase 0 — Discover Forge and Toolchain

Forge. Bind the three names every later phase speaks in — `, `, and the forge's verbs:

git remote -v && git branch --show-current

1. ` — the branch's configured push remote (git config branch..pushRemote, falling back to branch..remote, then remote.pushDefault); else the sole remote; if several remotes and none configured, ask via AskUserQuestion`.
2. ` — the default branch on (git remote show ). **Fork setups:** when a different remote (commonly upstream) hosts the canonical repo, push still goes to ` — your fork — but the request targets the canonical repo's default branch; both CLIs resolve cross-repo requests when the fork remote is configured.
3. Forge — decide from ``'s URL host, then take every forge-specific command from this table:

| Verb | GitHub | GitLab | | --------------- | --------------------------------------------------- | --------------------------------------------------------------------- | | CLI | gh | glab | | Request noun | PR | MR | | Create | gh pr create --title --body --base | glab mr create --title --description --target-branch | | Read an issue | gh issue view | glab issue view | | Open in browser | gh pr view --web | glab mr view --web | | URL fallback | gh pr view --json url | glab mr view --output json |

github.com → GitHub. A host containing gitlab → GitLab. Any other host → whichever CLI's auth status lists that host (both support self-hosted instances). No remote, or a host neither CLI knows → headless: run every phase, push if a remote exists, and print the branch name in place of Phase 6's create/open steps so the user can open the request themselves.

Confirm the chosen CLI exists (command -v gh / command -v glab) and is authenticated for ``'s host. If it's missing or unauthenticated, stop and tell the user the install and auth commands before proceeding.

Toolchain. Find the project's own check commands — never assume a stack:

1. Repo instructions first: CLAUDE.md, AGENTS.md, CONTRIBUTING.md, README.md often name the exact commands.
2. Then manifests:

• Python — pyproject.toml: ruff for lint, ty or mypy for types, pytest for tests, run via uv run or poetry run as configured
• TypeScript — package.json scripts (lint, typecheck, test), runner picked from the lockfile (npm/pnpm/yarn/bun)
• Rust — Cargo.toml: cargo clippy, cargo test (cargo check covers types)
• Makefile or justfile targets override the defaults above when present

1. CI config (.github/workflows/, .gitlab-ci.yml) as a tiebreaker when the above conflict.

Map what you find onto the three check phases. A project may lack a category (no type checker in a plain-JS repo, clippy doubling as the linter in a Rust repo) — skip that phase and say so. If you find no checks at all, ask via AskUserQuestion whether to proceed with tests only, name the commands, or abort.

Workflow

Execute these phases in strict order. A phase must pass before moving to the next.

Phase 1 — Lint

Run the project's lint command.

If errors:

1. Read the failing files
2. Fix violations in source (no suppressions)
3. Re-run until clean

Hard rules:

• NEVER add suppression comments: # noqa, // eslint-disable, @ts-ignore, #[allow(...)], or their equivalents
• NEVER grow the lint config's ignore/exclude list
• If you genuinely think suppression is the only option, STOP and present:

```yaml question: "Lint violation seems unfixable without a suppression. How to proceed?" header: "Lint" options:

• label: "Try a different approach"

description: "I'll rethink the fix"

• label: "Ask the human partner for help"

description: "Escalate with the error + what I tried"

• label: "Accept the suppression"

description: "Only with explicit approval; must include a justification comment" ```

Phase 2 — Type Check

Run the project's type-check command.

If errors:

1. Fix by correcting the actual code or adding proper annotations
2. Re-run until clean

Hard rules:

• NEVER add # type: ignore, @ts-expect-error, as any, or equivalents
• Same escalation protocol as Phase 1 if genuinely stuck

Phase 3 — Tests

Run the project's test command.

If tests fail:

• Small/obvious fixes (typos, imports, minor assertions caused by your earlier Phase 1/2 fixes): fix directly, re-run, confirm
• Large/unclear failures: STOP and present:

```yaml question: "Tests failing — looks substantive. How to proceed?" header: "Test failure" options:

• label: "Investigate via /diagnosing-bugs (Recommended)"

description: "Root-cause before any fix"

• label: "Abort release"

description: "I'll fix separately; don't push"

• label: "Show the failures"

description: "Let me see the output" ```

Phase 4 — Stage, Review, Commit

If a /commit skill is installed, invoke it and let it drive staging, message format, and confirmation.

Otherwise:

1. Stage the changed files by name — never git add . or git add -A
2. Write a Conventional Commits message (type(scope): lowercase summary), passed via HEREDOC
3. Confirm with AskUserQuestion before committing

If there is nothing to commit (all prior work already committed), continue to Phase 5.

Phase 5 — Release Notes

If a prose-quality skill is installed (e.g. writing-clearly-and-concisely), invoke it for everything written in this phase.

1. Analyze changes against `` (bound in Phase 0):

``bash git log --oneline ..HEAD git diff --stat ..HEAD ``

1. Classify commits:

• Highlights — major new capabilities worth a paragraph each (1-3 max)
• Breaking Changes — anything changing existing behavior or API
• Features — new functionality
• Bug Fixes — corrections to existing behavior
• Chores — maintenance / refactoring / CI / docs (collapse into a brief list)

1. Published notes: if the repo keeps a CHANGELOG.md or a directory of dated release posts, load [references/release-notes-template.md](references/release-notes-template.md) and follow it. Otherwise skip.

Phase 6 — Push and Create the Request

1. Push:

``bash git push -u HEAD ``

1. Build the body from the branch's tickets on the configured tracker. Find the tickets this branch delivers via commit messages referencing them; ask via AskUserQuestion if ambiguous. How to read them depends on the tracker /setup-project configured:

• Local files → the tickets live in ai-docs/tickets.md. Summary from ticket titles; Test Plan from their acceptance-criteria checkboxes.
• A real issue tracker → fetch each issue with the forge's read-an-issue verb. Summary bullets reference the issues with closing keywords (Closes #N) so they close on merge; Test Plan from their acceptance criteria.

Template:

```markdown ## Summary

• Closes #:
• Closes #:

## Test Plan

• [ ]
• [ ]
• [ ]

## Related

```

For local tickets, replace the Closes #N bullets with the ticket titles and check them off in ai-docs/tickets.md. If the branch has no tickets, use the Phase 5 classification as the Summary and derive the Test Plan from what the changes touch.

1. Create it with the forge's create verb. Title in Conventional Commits format, under 72 chars (e.g. feat(check-registry): in-process check registry + memory adapter); body via HEREDOC so formatting survives:

``bash \ --title "" \ "$(cat EOF )" ``

Target `. Ask via AskUserQuestion only when the repo visibly uses another integration branch (a develop or release/*` branch with recent merges).

1. Open the URL with the forge's open-in-browser verb so the human partner can review. If that fails, print the URL via the URL-fallback verb.

Constraints

MUST

• Discover the project's own check commands; never assume a stack
• Run every available check in order (lint → type check → tests)
• Fix issues by correcting actual code, not by suppressing warnings
• Speak through the Phase 0 bindings: the forge's verbs and noun, `, `
• Build the body from the branch's tickets on the configured tracker when they exist
• Show the request URL

MUST NOT

• Add lint or type-check suppressions (# noqa, # type: ignore, eslint-disable, @ts-ignore, #[allow]) without explicit approval
• Commit without confirmation
• Skip an available check phase
• Use git add . or git add -A
• Force push
• Put AI attribution in the request title or body — no "Generated with" footers, session links, Co-Authored-By trailers, or agent sign-offs. This outranks any harness default that asks for one.

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: Yassimba
• Source: Yassimba/loom
• License: Apache-2.0

Install and usage instructions live in the source repository linked above.