Configure Hetzner Floating Ip

Configure Hetzner Cloud Floating IP

Purpose

Configure a Hetzner Cloud Floating IP to be persistently assigned to an Ubuntu server. This skill creates the necessary Netplan configuration to ensure the floating IP remains active after system reboots.

Prerequisites

• Ubuntu server running 24.04 LTS or newer with Netplan (default on modern Ubuntu)
• SSH access to the server (root or sudo user)
• A Hetzner Cloud Floating IP already created in your project
• Primary network interface is eth0 (standard for Hetzner Cloud servers)

When to Use This Skill

Use this skill when you need to:

• Assign a Hetzner Cloud Floating IP permanently to a server
• Configure high-availability setups with failover IPs
• Set up load balancing with floating IPs
• Ensure floating IPs persist across server reboots
• Migrate floating IPs between servers with persistent configuration

Customization Variables

Before running commands, replace these placeholders:

• ``: The primary IP address of your server (for SSH access)
• ``: The Hetzner Cloud Floating IP to configure (e.g., 5.75.216.246)
• ``: SSH username (e.g., root, ubuntu)
• eth0: Replace with different interface name if needed (verify with ip link show)

Steps

1. Verify Server Uses Netplan

# Check if netplan directory exists
ssh @ 'ls -la /etc/netplan/'

# Check Ubuntu version (24.04+ uses netplan by default)
ssh @ 'lsb_release -a'

Expected: You should see netplan configuration files (*.yaml) in /etc/netplan/

2. Create Floating IP Configuration File

# Create netplan configuration for floating IP
ssh @ 'sudo tee /etc/netplan/60-floating-ip.yaml > /dev/null /32
EOF'

# Verify file was created correctly
ssh @ 'sudo cat /etc/netplan/60-floating-ip.yaml'

3. Set Correct File Permissions

# Netplan requires configuration files to have 600 permissions
ssh @ 'sudo chmod 600 /etc/netplan/60-floating-ip.yaml'

# Verify permissions
ssh @ 'ls -l /etc/netplan/60-floating-ip.yaml'

Expected: -rw------- 1 root root (600 permissions)

4. Apply Netplan Configuration

# Apply the new configuration
ssh @ 'sudo netplan apply'

# Verify no errors during apply
echo "If no errors above, configuration was applied successfully"

5. Verify Floating IP is Active

# Check that floating IP appears on eth0 interface
ssh @ 'ip addr show eth0'

# Verify floating IP is listed (look for /32)
ssh @ 'ip addr show eth0 | grep '

Expected: You should see /32 in the output

6. Test External Connectivity

# Test that the floating IP responds to ping from external source
ping -c 3 

# Verify server can reach external services via floating IP
ssh @ 'curl -s --interface  https://ifconfig.me'

Expected: Ping should succeed, and curl should return the floating IP address

Expected Results

After running all steps, you should have:

• ✓ Netplan configuration file /etc/netplan/60-floating-ip.yaml created
• ✓ File permissions set to 600 (required by netplan)
• ✓ Floating IP visible on eth0 interface via ip addr show
• ✓ Floating IP responds to external ping
• ✓ Configuration persists across server reboots
• ✓ No conflicts with primary IP address

Security Notes

• Root Access: This skill requires sudo/root access to modify network configuration
• Network Interruption: Applying netplan configuration may cause brief network interruption
• Firewall Rules: Ensure firewall rules allow traffic to the floating IP
• IP Conflicts: Verify the floating IP is not assigned to another server in Hetzner Cloud
• Backup Configuration: Keep a backup of working netplan configs before modifications

Troubleshooting

Netplan Apply Fails

Problem: sudo netplan apply returns errors Solution:

• Check YAML syntax in /etc/netplan/60-floating-ip.yaml (indentation must be exact)
• Verify file permissions are 600
• Use sudo netplan --debug apply for detailed error messages

Floating IP Not Appearing on Interface

Problem: ip addr show eth0 doesn't show the floating IP Solution:

• Verify the netplan configuration was applied: sudo netplan get
• Check if interface name is correct (might be ens3 instead of eth0)
• Restart networking: sudo systemctl restart systemd-networkd

Floating IP Not Reachable Externally

Problem: Cannot ping or connect to floating IP from outside Solution:

• Verify floating IP is assigned to this server in Hetzner Cloud Console
• Check firewall rules: sudo ufw status or sudo iptables -L
• Ensure the floating IP appears in ip addr show
• Verify routing: ip route show

Configuration Doesn't Persist After Reboot

Problem: Floating IP disappears after server restart Solution:

• Verify /etc/netplan/60-floating-ip.yaml still exists after reboot
• Check file wasn't overwritten by other netplan configs
• Ensure netplan service is enabled: sudo systemctl status systemd-networkd

Permission Denied Errors

Problem: Cannot modify netplan configuration files Solution:

• Ensure using sudo for all configuration commands
• Verify user has sudo privileges: sudo -v
• Check file ownership: ls -l /etc/netplan/

References

• Hetzner Cloud Floating IP Documentation: https://docs.hetzner.com/cloud/floating-ips/persistent-configuration/
• Ubuntu Netplan Documentation: https://netplan.io/
• Systemd-networkd Documentation: https://www.freedesktop.org/software/systemd/man/systemd.network.html
• Hetzner Cloud Console: https://console.hetzner.cloud/

Source & license

This open-source skill is cataloged on AgentStack and links to its original source — we do not rehost the code.

• Author: zheli
• Source: zheli/agent-skills
• License: MIT

Install and usage instructions live in the source repository linked above.